Whirlpool GR399LXG warranty Oven Light, To replace the oven light, Press the oven light pad

CARING FOR YOUR RANGE

REMOVING THE OVEN DOOR (CONT.)

2.Hold oven door so that the top edge of each hinge hanger is horizontal. Insert hinge hangers into the front frame hinge slots.

3.Rotate top of door toward range. Slide hinge hangers down onto front frame support pins.

NOTE: Make sure the hinge hangers are fully seated and engaged on the support pins.

Door stop	Range
clip
Door removal	Hinge
	hanger
pin hole
	Support pins

4.Insert the door stop clip with the angular surface at the top of the frame hinge slot, then push in the bottom of the clip until flanges are flush with the front frame.

5.Open the door completely and remove the door removal pins. Save door removal pins for future use.

6.Close the door.

Door removal pin hole

Front frame hinge slot

Angular

surface of door stop clip

THE OVEN LIGHT

The oven light will come on when you open the oven door.

To turn the light on or off when the oven door is closed:

•Press the oven light pad. LIGHT

To replace the oven light:

1.Unplug range or disconnect power.

2.Remove the glass bulb cover in the back of the oven by turning it counterclockwise.

4.Replace the bulb cover by turning it clockwise.

3.Remove the light bulb from its socket.

Replace the bulb with a 40-watt appliance bulb.

5.Plug in range or reconnect power.

NOTE: The oven light will not work during the Self-Cleaning cycle.

41