Aiwa XR-H33MD user service Programmed Edit Recording

Page 28

PROGRAMMED EDIT RECORDING

Programmed edit function enables CD recording while check the remaining time on each side of the tape as the tracks are programmed.

NOTE

The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded from the beginning of either side.

1 Insert the tape into deck 2.

Insert the tape with the side to be recorded on first facing out from the unit.

2Press the CD button and load the CD(s).

3Press the EDIT/CHECK button twice on the remote control while pressing SHIFT. PRGM lights up.

When "AI" is displayed, press EDIT/CHECK while pressing SHIFT again.

4Press the numbered buttons 0-9 on the remote control to designate the tape length.

10to 99 minutes can be specified.

5Press the DISC DIRECT PLAY 1-3 to select a CD. Then, press the numbered buttons 0-9 and +10 button to program a track.

6Repeat step 5 for the rest of the tracks for side A.

A track whose playing time is longer than the remaining time cannot be programmed.

Image 28

Contents XR-H33MD English pgPrecautions InstallationElectric Power Owners recordTable of Contents Radio Reception Check your system and accessories Before connecting the AC cordPreparations ConnectionsConnect the supplied antennas Connect the AC cord to an AC outletRemote Control When to replace batteriesTo use Shift on the remote control To use Function on the remote controlBefore Operation Audio Adjustments VolumeSound Super T-BASS SystemManual Tuning Radio ReceptionPresetting Stations Preset Number Tuning Selecting a preset number on the main unitTo clear a preset station Repeat steps 1To select a reverse mode deck 2 only Tape PlaybackBasic Operations Press Button to start playWhen tapes are loaded in both decks To start play when the power is off Direct Play FunctionContinuous Play To set the tape counter toAbout cassette tapes Playing Discs Loading DiscsTo play all discs in the disc compartment, press RANDOM/REPEAT Play Programmed Play Press the RANDOM/REPEAT button repeatedlyTo clear the program To add tracks to the programTo change the programmed tracks To play the programmed tracks repeatedlyPress To select a track with the remote control To play a disc at double speedTo check the track title To check the disc titlePage Select the reverse mode Tape RecordingBasic Recording Preparation Use Type I normal tapes onlyInserting Blank Spaces Dubbing a Tape ManuallyDubbing the Whole Tape Press the Sync DUB button to start recording AI Edit RecordingInsert the tape into deck To stop the recording To clear the edit programTo check the order of the programmed track numbers To add tracks from other discs to the edit programProgrammed Edit Recording MD Recording Recording a Whole CDPress zTAPE REC/REC Mute button to start recording To stop recordingDisplay information during recording Registering index marks automaticallyAuto First Tracks Recording CDS Recording only ONE Track of aTo record on a previously recorded MD Programmed Recording of CDS Recording Three CDS CONTINUOUSLYzWithin 10 seconds, press the Enter button Press zMD REC Press the to start recordingTo add index marks during recording Recording levelRecording from a TAPE, Radio or Connected Equipment Press the Mode buttonWithin 10 seconds, press the Enter button Press the zMD REC button Extended Recording MonauralTo prevent accidental erasure of recorded material Press Mode three times Extended Timer Recording Type of MDOptical discs Recordable MO*1 discsQuick random access Limitations of MDUltra compact size made possible by ATRAC*2 technology Track numbers may not be registered properlyRegistering the Disc Title Track Title Enter a letter, number or symbolRegistering the Disc Title Registering the Track Titles Dividing a Track Press MD Edit repeatedly until Divide is displayed Within 10 seconds, press EnterPress MD Edit repeatedly until Combine is displayed Combining TWO TracksIf the tracks are titled Changing the Order Tracks Erasing Tracks Erasing ALL Tracks on a DiscErasing a Single Track Within 1 minute, press the Enter button againClock and Timer Setting the ClockSetting the Timer To switch to the 24-hour standardIf the clock display flashes PreparationSetting the Timer Recording Setting the Sleep Timer Connecting Optional Equipment Other ConnectionsVIDEO/AUX Jacks CD Digital OUT /MD Digital OUT Optical JacksListening to External Sources Digital in Optical JackTo Play Equipment Connected to the VIDEO/AUX Jacks To Play Equipment Connected to the Digital in Jack Care and MaintenanceGeneral Specifications Care of tapesCare of MDs Main unit CX-NH33MDSpeaker system SX-NH33 Troubleshooting Guide Tuner SectionCD Player Section Cassette Deck SectionMD Recorder Section To reset Parts Index