Aiwa XR-H33MD To Play Equipment Connected to the Digital in Jack, General, Care and Maintenance

Page 53

TO PLAY EQUIPMENT CONNECTED TO THE DIGITAL IN JACK

1 Press AUX/D-IN repeatedly until "D-IN" appears on the display.

2 Play the connected equipment.

 

 

 

 

 

GENERAL

pg. 33

 

 

 

 

 

CARE AND MAINTENANCE

Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit.

To clean the cabinet

Use a soft and dry cloth.

If the surfaces are extremely dirty, use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents, such as alcohol, benzine or thinner as these could damage the finish of the unit.

To clean the heads and tape paths

After every 10 hours of use, clean the heads and tape paths with a head cleaning cassette or cotton swab moistened with cleaning fluid or denatured alcohol. (These cleaning kits are commercially available.)

When cleaning with a cotton swab, wipe the recording/playback head, erasure head (deck 2 only), capstans, and pinchrollers.

After cleaning the heads and tape paths with a liquid head cleaning cassette or a moistened swab, wait until the cleaned parts are completely dry before inserting the tapes.

To demagnetize the heads

The heads may become magnetized after long-term use. This may narrow the output range of recorded tapes and increase noise. After 20 to 30 hours of use, demagnetize the heads with any commercially available demagnetizer.

Care of CDs

• When a CD becomes dirty, wipe the CD from the center out with a cleaning cloth.

Image 53
Contents English pg XR-H33MDInstallation PrecautionsElectric Power Owners recordTable of Contents Radio Reception Before connecting the AC cord Check your system and accessoriesPreparations ConnectionsConnect the AC cord to an AC outlet Connect the supplied antennasWhen to replace batteries Remote ControlTo use Shift on the remote control To use Function on the remote controlBefore Operation Volume Audio AdjustmentsSound Super T-BASS SystemRadio Reception Manual TuningPresetting Stations Selecting a preset number on the main unit Preset Number TuningTo clear a preset station Repeat steps 1Tape Playback To select a reverse mode deck 2 onlyBasic Operations Press Button to start playTo start play when the power is off Direct Play Function When tapes are loaded in both decksContinuous Play To set the tape counter toAbout cassette tapes To play all discs in the disc compartment, press Loading DiscsPlaying Discs RANDOM/REPEAT Play Press the RANDOM/REPEAT button repeatedly Programmed PlayTo add tracks to the program To clear the programTo change the programmed tracks To play the programmed tracks repeatedlyPress To play a disc at double speed To select a track with the remote controlTo check the track title To check the disc titlePage Tape Recording Select the reverse modeBasic Recording Preparation Use Type I normal tapes onlyDubbing a Tape Manually Inserting Blank SpacesDubbing the Whole Tape Insert the tape into deck AI Edit RecordingPress the Sync DUB button to start recording To clear the edit program To stop the recordingTo check the order of the programmed track numbers To add tracks from other discs to the edit programProgrammed Edit Recording Recording a Whole CD MD RecordingPress zTAPE REC/REC Mute button to start recording To stop recordingRegistering index marks automatically Display information during recordingTo record on a previously recorded MD Recording only ONE Track of aAuto First Tracks Recording CDS Programmed Recording of CDS CONTINUOUSLYz Recording Three CDSPress the to start recording Within 10 seconds, press the Enter button Press zMD RECTo add index marks during recording Recording levelWithin 10 seconds, press the Enter button Press the Mode buttonRecording from a TAPE, Radio or Connected Equipment To prevent accidental erasure of recorded material Extended Recording MonauralPress the zMD REC button Press Mode three times Type of MD Extended Timer RecordingOptical discs Recordable MO*1 discsLimitations of MD Quick random accessUltra compact size made possible by ATRAC*2 technology Track numbers may not be registered properlyRegistering the Disc Title Enter a letter, number or symbolRegistering the Disc Title Track Title Registering the Track Titles Dividing a Track Within 10 seconds, press Enter Press MD Edit repeatedly until Divide is displayedIf the tracks are titled Combining TWO TracksPress MD Edit repeatedly until Combine is displayed Changing the Order Tracks Erasing ALL Tracks on a Disc Erasing TracksErasing a Single Track Within 1 minute, press the Enter button againSetting the Clock Clock and TimerTo switch to the 24-hour standard Setting the TimerIf the clock display flashes PreparationSetting the Timer Recording Setting the Sleep Timer Other Connections Connecting Optional EquipmentVIDEO/AUX Jacks CD Digital OUT /MD Digital OUT Optical JacksTo Play Equipment Connected to the VIDEO/AUX Jacks Digital in Optical JackListening to External Sources General Care and MaintenanceTo Play Equipment Connected to the Digital in Jack Care of tapes SpecificationsCare of MDs Main unit CX-NH33MDSpeaker system SX-NH33 Tuner Section Troubleshooting GuideMD Recorder Section Cassette Deck SectionCD Player Section To reset Parts Index