Aiwa XR-H33MD user service To reset

Page 58

To reset

If an unusual condition occurs in the display window or the cassette decks, reset the unit as follows.

1 Press POWER to turn off the power.

2 Press POWER to turn the power back on while pressing CLEAR. Everything stored in memory after purchase is canceled.

If the power cannot be turned off in step 1 because of a malfunction, reset by disconnecting the AC cord, and connect it again. Then carry out step 2.


		GENERAL (cont.)				pg. 36


		MD GUIDE MESSAGES


		Message		Cause		Solution

		Blank disc		Nothing is recorded on the disc.		---
		Can't Edit		The disc is record-protected.		Slide the record-protect tab on the
						disc. (See page 22.)

				Tracks are too short to be joined.		See "THE LIMITATIONS OF MD" on
						page 24.

				The combine function was used
				while playing back the first track.
				The divide function was use at the		Disabled
				beginning of the track.		Disabled

				The combine function was used to
				join a track recorded in monaural
				with a track recorded in stereo.

				Programmed play or random play is		Cancel the programmed play or
				activated.		random play.
		Disc Error		The disc is damaged by scratches.		Replace the disc.

				The unit received a strong shock		Do not subject the disc to strong
				during a TOC reading.		shock during a TOC reading.

		Disc Full		There is not enough time remaining		Replace the disc with another
				on the disc to record.		recordable disc.
		Temp Over		The temperature of the unit is too		Leave the unit in a cool place for a
				high.		while before operating in again.

				The surrounding temperature is too		Operate the unit at moderate room
				high or too low.		temperature.

		Emergency		The unit operates abnormally due to		Replace the disc. Do not subject the
				a scratched disc or strong shock.		disc to a strong shock.
		PB Disc		There is an attempt to record or edit		Replace the disc with a recordable
				a prerecorded music disc (optical		one.
				disc).

		Protected		The disc is record-protected.		Slide the record-protect tab on the
						disc (see page 22.)

		TOC Full		There are too many tracks or		Erase tracks.
				emphasis data to be recorded or
				edited, or there is no room on the
				disc.

Image 58

Contents XR-H33MD English pgElectric Power PrecautionsInstallation Owners recordTable of Contents Radio Reception Preparations Check your system and accessoriesBefore connecting the AC cord ConnectionsConnect the supplied antennas Connect the AC cord to an AC outletTo use Shift on the remote control Remote ControlWhen to replace batteries To use Function on the remote controlBefore Operation Sound Audio AdjustmentsVolume Super T-BASS SystemManual Tuning Radio ReceptionPresetting Stations To clear a preset station Preset Number TuningSelecting a preset number on the main unit Repeat steps 1Basic Operations To select a reverse mode deck 2 onlyTape Playback Press Button to start playContinuous Play When tapes are loaded in both decksTo start play when the power is off Direct Play Function To set the tape counter toAbout cassette tapes Playing Discs Loading DiscsTo play all discs in the disc compartment, press RANDOM/REPEAT Play Programmed Play Press the RANDOM/REPEAT button repeatedlyTo change the programmed tracks To clear the programTo add tracks to the program To play the programmed tracks repeatedlyPress To check the track title To select a track with the remote controlTo play a disc at double speed To check the disc titlePage Basic Recording Select the reverse modeTape Recording Preparation Use Type I normal tapes onlyInserting Blank Spaces Dubbing a Tape ManuallyDubbing the Whole Tape Press the Sync DUB button to start recording AI Edit RecordingInsert the tape into deck To check the order of the programmed track numbers To stop the recordingTo clear the edit program To add tracks from other discs to the edit programProgrammed Edit Recording Press zTAPE REC/REC Mute button to start recording MD RecordingRecording a Whole CD To stop recordingDisplay information during recording Registering index marks automaticallyAuto First Tracks Recording CDS Recording only ONE Track of aTo record on a previously recorded MD Programmed Recording of CDS Recording Three CDS CONTINUOUSLYzTo add index marks during recording Within 10 seconds, press the Enter button Press zMD RECPress the to start recording Recording levelRecording from a TAPE, Radio or Connected Equipment Press the Mode buttonWithin 10 seconds, press the Enter button Press the zMD REC button Extended Recording MonauralTo prevent accidental erasure of recorded material Press Mode three times Optical discs Extended Timer RecordingType of MD Recordable MO*1 discsUltra compact size made possible by ATRAC*2 technology Quick random accessLimitations of MD Track numbers may not be registered properlyRegistering the Disc Title Track Title Enter a letter, number or symbolRegistering the Disc Title Registering the Track Titles Dividing a Track Press MD Edit repeatedly until Divide is displayed Within 10 seconds, press EnterPress MD Edit repeatedly until Combine is displayed Combining TWO TracksIf the tracks are titled Changing the Order Tracks Erasing a Single Track Erasing TracksErasing ALL Tracks on a Disc Within 1 minute, press the Enter button againClock and Timer Setting the ClockIf the clock display flashes Setting the TimerTo switch to the 24-hour standard PreparationSetting the Timer Recording Setting the Sleep Timer VIDEO/AUX Jacks Connecting Optional EquipmentOther Connections CD Digital OUT /MD Digital OUT Optical JacksListening to External Sources Digital in Optical JackTo Play Equipment Connected to the VIDEO/AUX Jacks To Play Equipment Connected to the Digital in Jack Care and MaintenanceGeneral Care of MDs SpecificationsCare of tapes Main unit CX-NH33MDSpeaker system SX-NH33 Troubleshooting Guide Tuner SectionCD Player Section Cassette Deck SectionMD Recorder Section To reset Parts Index