Aiwa NSX-A115 manual Preset Number Tuning, Press TUNER/BAND repeatedly to select the desired band

Page 10

1 Press TUNER/BAND repeatedly to select the desired band.

When TUNER/BAND is pressed while the power is off, the power is turned on directly.

To select a band with the remote control

Press BAND while pressing SHIFT,

2 Press + DOWN or ~ UP to select a station.

Each time the button is pressed, the frequency changes. When a station is received, “TUNE is displayed for 2 seconds. During FM stereo reception, [[[011) is displayed.

To search for a station quickly (Auto Search)

Keep < DOWN or > UP pressed until the frequency starts to change rapidly. After tuning in to a station, the search stops.

To stop the Auto Search manually, press+ DOWN or ~ UP.

The Auto Search may not stop at stations with very weak signals.

When an FM stereo broadcast contains noise

Press MONOTUNER while pressing SHIFT on the remote control so that “MONO appears on the display.

Noise is reduced, although reception is monaural.

To restore stereo reception, repeat the above so that “MONO disappears.

To change the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the tuning interval.

Press POWER while pressing P.

To reset the interval, repeat this procedure.

m

When the AM tuning interval is changed, all preset stations are cleared. The preset stations have to be set again.

I () ENGL/SH

The unit can store a total of 32 preset stations. When a station is stored, a preset number is assigned to the station. Use the preset number to tune in to a preset station directly.

1 Press TUNEFUBAND to select a band, and press

4 DOWN or > UP to select a station.

2Press 11 SET to store the station.

A preset number beginning from 1 in consecutive order for each band is assigned to the station.

Preset number

I

3Repeat steps 1 and 2.

The next station will not be stored if a total of 32 preset stations for all the bands have already been stored.

m

“FULL’is displayed if you attempt to store more than 32 preset stations.

e...=~==mr.... .......... ...”......, -..-=WA”-”. .,”.,$---..=& ..:,$:......,,U---!,,3mr+@A-pms.Ta%a@&&.yh:s>%:, z.,,

PRESET NUMBER TUNING

Use the remote control to select the preset number directly.

1 Press BAND while pressing SHIFT to select a band.

2Press numbered buttons O-9 and +1 O to select a preset number.

Example:

To select preset number 20, press +10, +10 and O. To select preset number 15, press +10 and 5.

Selecting a preset number on the main unit

Press TUNER/BAND to select a band. Then, press > PRESET repeatedly.

Each time - PRESET is pressed, the next ascending number is selected.

To clear a preset station

Select the preset number of the station to be cleared. Then, press

CLEAR, and press II SET within 4 seconds.

The preset numbers of all other stations in the band with higher numbers are also decreased by one.

Image 10
Contents IilFl!45 Digital AudiiEnglish Sound Clock and TimerPreparations Tape PlaybackUnit Check your system and accessoriesConnect the right and left speakers to the main Connect the supplied antennasConnecting AN Outdoor Antenna To change the brightness level of the display To turn the power onTo select with the remote control DimmerPress Tape and press WA to open the cassette holder To cancel the selected modeSound adjustment during recording Press F to start playTo play one disc only, press Disc Direct Play Selecting a track with the remote controlTo play all discs in the disc compartment, press To stop play, press WPress Disc Diirect Play 1-3 to select a disc Press Prgm while pressing Shift in stop modePress numbered buttons +1 Oto program Track Press + Down or ~ UP to select a station Preset Number TuningPress TUNER/BAND repeatedly to select the desired band Repeat steps 1To record selected tracks of the CD Insert the tape to be recorded on into deckPreparation To record part of the CDTo check the order of the programmed track numbers Press on deck 1 to start recording on the first sideTo add tracks from other discs to the edit program Turn over the tape in deck 1 and press O to start recording Insert the tape into deckRepeat for the rest of the tracks for side To change the program of each sideTo cancel the sleep timer To switch to the 24-hour standardTo check the time remaining until the power is turned off PressPress one of the function buttons to select a source Adjust the volumePress Power to turn off the power Prepare the sourcePress VIDEO/AUX DEO/AUX JacksPlay the connected equipment General Cassette Deck SectionTape does not run Tuner SectionXhxd CopyrightPage Anotacion del propietario Enerafa electricaReproduction DE Cintas PreparativesSonido Reproduction DE Discos CcmpactosImportante Conecte Ias antenas suministradasConecte el cable de alimentaci6n de CA a una toma de CA Speakers LCuando reemplazar Ias pilas Ulna superficieInsertion de Ias pilas Para utilizar Shift del control remotoModo de demostracion Demo Para cancelar el modo DemoPara conectar la alimentacion Para desconectar la alimentacionPulse F para iniciar la reproduction Pulse Tape y 9/4 para abrir el portacaseteLu~iiz~cionde ~uricuiarps Shift Disc Change Para reproducer un disco solamente, pulse Disc Direct PlayReemplazo de discos durante la reproduction Para reproducer uno o dos discos, ponga Ios discos en IasPulse Disc Direct Play 1-3 para seleccionar un disco Para buscar rapidamente una emisora busqueda automatic Sintonizacion Mediante Numero DE PreajustePulse + Down o *UP para seleccionar una emisora Repita 10s pasos 1 yIrwerte la cinta que vaya a grabar en la platina Para detener la grabacion Para borrar el programa de editionOPEN/CLOSE Tiempo de’ Ias cintas de casete y tiempo de editionHmerte la cinta en la platina Para cambiar el programa de cada caraPara cambiar al modo de 24 horas Pulse IlDesconecte la aiimentacion Si parpadea la visualization del relojPulse Power para desconectar la alimentacion Ajuste el volumenPrepare la fuente VIDEO/AUX Pulse VIDEO/AUXHaga la reproduccirh en el equipo conectado Cuando conecte un giradiscosSeccion DEL Sintonizador GeneralidadesSeccion DE LA Platina Derechos DE Autor Page Installation Enregistrement Lecture DE Disques CompactsReception Radio Iorloge ET MinuterieConnecter Ies antennes fournies Brancher Ie cordon secteur a une prise de courantConnexion D’UNE Antenne Exterhjre FunctionPour selectionner avec la telecommande Mode Demo DemonstrationPour annuler Ie mode Demo Pour mettre sous tensionOuvrir Ie porte-cassette Appuyer sur b- pour demarrer la lectureAppuyer sur Selection d’une Plage avec la telecommandeLecture DE Disques Pour verifier Ie temps restantLecture ALEATOIRE/REPETEE ShiftAppuyer sur Down ou * UP pour selectionner une station Accord SUR UNE Station MemoriseeRe~eter Ies eta~es 1 et Inserer la cassette a enregistrer clans la platine Appuyer sur pour demarrer I’enregistrementSur pour demarrer I’enregistrement sur la deuxieme face Du montageLa face A, puis appuyer sur @ pour demarrer Sur Shift de la t61ecommandeRepeter I’etape 5 pour Ie reste des plages dle la Face a ’enregistrementPour passer au format de 24 heures Pour retablir un reglage initial de I’horlogeSi I’affichage de I’horloge clignote Appuyer Sur Power pour mettre I’appareil Hors Tension Regler Ie volumePreparer La source Pour connecter un tourne-disque Appuyer sur VIDEO/AUXMettre I’appareil connecte en lecture Quand la prise CD Digital OUT Optical n’est pas utiliseePartie Tuner $$,,~Generalities Partie MagnetocassettePartie tuner FM Droits D’AUTEURPage Disc Direct PLAY1-3 Disc Change OPEN/CLOSE

NSX-A115 specifications

The Aiwa NSX-A115 is a remarkable compact stereo system that exemplifies the fusion of style, functionality, and advanced audio technology, making it a popular choice among music enthusiasts. Designed to cater to a diverse audience, this system is equipped with a range of features that enhance the listening experience while maintaining an aesthetic appeal.

One of the standout features of the Aiwa NSX-A115 is its powerful sound output, which is achieved through its dual speaker configuration. Each speaker is engineered to deliver a well-rounded sound profile, ensuring that bass, mids, and treble are balanced for an immersive audio experience. The speakers are also designed to minimize distortion at high volumes, allowing users to enjoy their favorite tracks without compromising on sound quality.

The system incorporates a built-in CD player, which enables users to enjoy their CD collections with ease. The CD mechanism is reliable and quick to load, providing hassle-free operation. Additionally, the Aiwa NSX-A115 supports various audio formats, ensuring compatibility with a wide range of CDs. It also features an AM/FM tuner that provides access to numerous radio stations, offering yet another source of entertainment.

In terms of connectivity, the Aiwa NSX-A115 is equipped with multiple input options, including an auxiliary input, allowing users to connect external devices such as smartphones, tablets, or computers. This versatility makes it an excellent choice for those who wish to stream music directly from their personal devices. Moreover, this system includes a headphone jack, providing a private listening experience for individual users.

The design of the Aiwa NSX-A115 reflects a modern aesthetic, with a sleek chassis and well-placed controls that make it easy to navigate. The LED display complements the overall look while providing clear visibility of track information and source selection. This thoughtful design extends to the remote control, which enhances user convenience by allowing for operation from a distance.

Additional features include a programmable memory function that enables users to create custom playlists from their CDs, as well as a bass boost function for those who prefer a deeper low-frequency response. Overall, the Aiwa NSX-A115 stands out as a compact stereo system that successfully integrates advanced audio technology, versatility, and modern design, making it an appealing option for any audio enthusiast looking to enhance their listening experience.