To position the antennas FM feeder antenna:
Extend this antenna horizontally in a
AM antenna:
Position to find the best possible reception.
To stand the AM antenna on a surface
Fix the claw to the slot,
*Be sure to connect the speaker cords correctly. Improper connections can cause short circuits in SPEAKERS terminals.
*Do not leave objects generating magnetism, such as credit cards, near the speakers, as these objects may be damaged.
*Do not bring the FM antenna near metal objects or curtain rails.
*Do not bring the AM antenna near other optional equipment, the stereo system itself, the AC cord or speaker cords, since noise will be picked up.
*Do not unwind the AM antenna wire.
CONNECTING AN OUTDOOR ANTENNA
For better FM reception, use of an outdoor antenna is recommended.
Connect the outdoor antenna to FM 75 C?terminals. .
Inserting batteries
Detach the battery cover on the rear of the remote control and insert two R6 (size AA) batteries,
R6(AA)
When to replace the batteries
The maximum operational distance between the remote control and the sensor on the main unit should be approximately 5 meters (16 feet), When this distance decreases, replace the batteries with new ones.
To use SHIFT on the remote control
Buttons o have two different functions. One of these functions is indicated on the button, and the other on the plate above the button.
To use the function on the button, simply press the button.
To use the function on the plate above the button, press the button while pressing SHIFT.
Tcr use FUNCTION on the remote control
FUNCTION substitutes for the function buttons (TAPE, TUNER/ BAND, VIDEO/AUX, CD) on the main unit.
Each time FUNCTION is pressed, the next function is selected cyclically, When tapes are inserted in both decks, each deck is selected with FUNCTION.
m
* If the remote control is nclt going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage.
● The remote control may not operate correctly when:
- The line of sight between the remote control and the remote sensor inside the display window is exposed to intense light, such as direct sunlight
- Other remote controls ars used nearby (those of a television, etc. )
ETo connect other optional equipment+ page 16.