[Page 9]
Control Panel For
CCBC-4-35
1.Select Chill Mode
2.Select Hard or Soft Blast
3.Select Timer for probe or time of process
4.When satisfied with selections, press Check to Start Cycle
5.Press if you want to erase and start programming over
Probe Temperature Displayed
Cabinet Temperature or "DEF" when in Defrost cycle
Control Panel For
CCBC-12-75 & CCBC-12-UA-100
1.Select Chill Mode
2.Select Hard or Soft Blast
3.Select Timer for probe or time of process
4.When satisfied with selections, press Check to Start Cycle
5.Press if you want to erase and start programming over
Probe Temperature Displayed
Cabinet Temperature or "DEF" when in Defrost cycle