Worth Data 7000 manual

Page 2

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Shielded cables and I/O cords must be used with this equipment to comply with the relevant FCC regulations. Changes or modifications not expressly approved in writing by Worth Data may void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device.

The 7001 RF Terminal and B5001 Base Station have been approved for use in the United States and Canada as a low power frequency hopping spread-spectrum radio operating in the unlicensed 915 MHz frequency range.

The LT7001 model of this product has a laser scanner integrated with the Terminal as one unit. The laser used is a Class II Laser Product and has a 1.2 Milliwatt Output. To operate the laser scanner, aim the top of the case at a bar code, and press the yellow scan key on the keyboard of the RF Terminal. The light source will turn off, once a successful scan has occurred or 2.5 seconds has elapsed, whichever is first. Do not look directly into the laser light source with the "Scan Key" depressed; avoid direct eye contact with the laser light source.

The LTnnnn models of the RF Terminal are covered by one or more of the following U.S. Patents:

Patent #

4,360,798

4,369,361

4,387,297

4,460,120

4,496,831

4,593,186

4,603,262

4,607,156

4,652,750

4673,805

4,736,095

4,758,717

4,816,660

4,845,350

4,896,026

4,897,532

4,923,281

4,933,538

4,992,717

5,015,833

5017765

5,021,641

5,029,183

5,047,617

5,103,461

5,113,445

5,140,144

5,142,550

5,149,950

5,157,687

5,168,148

5,168,149

5,180,904

5,229,591

5,230,088

5,235,167

5,243,655

5,247,162

5,250,791

5,250,792

5,262,627

5,280,163

5,280,164

5,280,498

5,304,786

5,304,788

5,321,246

5,377,361

5,367,151

5,373,148

5,378,882

5,396,053

5,396,055

5,399,646

5,408,081

5,410,139

5,410,140

5,412,198

5,418,812

4,420,411

5,436,440

5,444,231

5,449,891

5,449,893

5,468,949

5,479,000

5,479,002

5,479,441

5,504,322

5,528,621

5,532,469

5,543,610

5,545,889

5,552,592

5,578,810

5,589,680

5,612,531

 

 

There are no user adjustments or maintenance operations to be performed on the integrated laser scanner.

Image 2
Contents Page Page Table of Contents Introduction DifferencesPage Connecting the Base Station to a serial port InstallationInstallation Sequence ComponentsBase station channel… Connecting the Base station…Configuring the Base station… Charge Battery Hit Any Key Using the RF Terminal keypad…Battery Life Indicator Battery too Low to Operate Hit Any Key to Power DownCharging Battery Please Wait……… To change the internal batteryRecharging the battery Battery Charge CompleteFirmware Uxxx HWyy-Rzz Opening screen can be bypassed upon power up. See ChapterTerminal Menu Functions Installing the Windows Terminal Loader Utility Installing the RF Terminal Utilities SoftwareUsing the Windows 7000 RF Terminal Loader Utility Windows Demo Programs and RF DLL Programmers LibraryTerminal Eprom Loader Help Uninstall Sign On Setup One Way Mode RF Site Survey RF System SetupUsing the Setup Menu on the RF Terminal RF Configuration RF Terminal IDSkip Opening Screens RF Terminal ChannelSecurity Code Control Keys OnlyCode 3 of 9 Code Bar Code OptionsAutomatic Check Back UPC-A / EAN-13 Options Codabar UPC-E / EAN-8 OptionsCode 5 CodeDataBar / RSS-14 Options MSI and PlesseyCode 93 / Code RS-232 I/O Settings Date Format Set TimeSet Date Year OutputSpeaker Settings Laser OptionsLCD Options Nnmm Other SettingsPreamble Settings menu PostambleCharacters Reset to Factory DefaultSystem Tools Download FileBase and Relay Setup Using the RF 7000 Configuration Utility@@*EdataaaaaaaaEOT Testing the RF link between base station and hostOperational Theory DataaaaaaaaCRLittle more in depth… How the Two-Way RF System worksBasic RF System communications… Here is how it worksHow the One-Way RF System works Can I change a prompt after it has been sent?How Site Survey works Data Received Was Enter Data?Performing a Site Survey Performance IssuesEvaluating your area of planned operation Press Enter When Ready or F1 to Exit Site Testing in Progress Please Wait…………Relay n Cannot be Relay StationsHow Relay Stations work… Determining coverage areas for Base Stations and Relays Is radio traffic contention likely?Relay Installation Before you begin programming… Failure Planning Command without an IDOperator Errors Hardware FailuresPlanning Programming for the RF TerminalLOW Level Ascii sequences directly Host to Terminal ProgrammingColor Display Programming @Cfnfnfn...\cb= White Where n m @n,m,o,data@1,1,1,ITEM@2,1,1,QTY Page @2,1,1,ENTER Item no Base Station to Host Formats Serial ReplyAddressing a Terminal not SIGNed on Base Station Error FeedbackBase Shut Down Due to Host Logic Error ?CR Sequence Error MessageIllegal Command @1,1,1,Scan Serial NumberControl Keys for Possible Programming Base Station Initialized MessagePage PromptCOM/ActiveX Concepts ActiveX Object ProgrammingValid valuesNone, Even, Odd Properties ActiveX ObjectValid values Color Codes for True, FalseMethods ActiveX Object Line TerminalParameters line, position, prompt,FG,BG Parameters line, position, promptParameters line, position, prompt, FG, BG Parameters line, position, prompt, shiftedParameters font, linecount Parameters FGcolor, BGcolor Events ActiveX ObjectData passedterminal, data Terminal Data PassedClient Utility Programming Considerations Network SetupPromptNET TCP/IP Active X Controls Server CommunicationsConcepts TCP/IP COM Test For Good CommunicationValid values blank or a valid file name ProblemsProperties TCP/IP COM Read OnlyParameters basename, channel, terminal, line Parameters basename, channel, terminal, dataParameters basename, channel, terminal Parameters basename, channel, terminal, countEvents TCP/IP COM Parameters basename, channel, terminal, msgnumParameters basename, channel Data passedbasename, channelData passedbasename, channel, terminal, data OnTermEndKey Zebra Cameo Printer Portable PrintersCameo and QL 3 Common Information Zebra QL 3 Printer Part Number Description Price/RollAssigning Error Messages Why Use Voice Messages and Prompts?Tips for Using Voice Prompts Voice Message OperationsDefault Voice Messages Changing the Battery TroubleshootingProblems with a new installation General ConsiderationsMeaning Action Required Terminal Error MessagesMessage Message Meaning Action RequiredMy response time is poor Troubleshooting specific problemsCan’t communicate at all Im not getting the distance I needGet 6 beeps when the RF Terminal powers up RF Terminal ProblemsProblems reading Bar Codes Reader wont beep when I try to read bar codesIf you have a problem… Have very poor read rates when scanning bar codesRMA #XXXXXX Changing a Base to a Relay Channel and Jumper ChangesOpening a Base RS-422 Termination JumpersAdding Relays Connecting a Relay StationSetting the Relay ID Channel ChangesRouting the Wiring Correct Routing for WiringRelay Test Plan and Failures Relay Failure Incorrect Routing for WiringRelay Station RS422 Pin-outs Changing the Channel on a Relay Testing the RelayChanging a Relay back to a Base RS-422 TerminationF34 DB25 Null Modem Cable Serial Pin-outsBase Station to Host Pin-outs F36 DB9 Straight CableRelay Station RS422 Pin-outs Firmware UpgradesTerminal Firmware Upgrades Normal Firmware Download for a TerminalFailsafe Firmware Download for a Terminal Code 39 SpecificationsBase Station Firmware upgrades C39Mod 43 Check character calculation for Code Code 39 Advanced Features and FunctionsMod 43 Check Character Value 22 is the Check CharacterAccumulate Mode Full Ascii Extension to CodeCode 93 Specifications Clear EnterA12345b Codabar SpecificationsCode 128 Specifications Codabar start/stop transmissionInterleaved 2 of 5 Code Specifications UCC-128 Shipping Container CodeUPC / EAN Specifications Isbn Specifications Supplemental codesUPC/EAN checksum character MSI/Plessey Specifications How to scan a bar code Laser ScannersLaser Options Aiming the Laser DotAscii Code Equivalent Table BEL

7000 specifications

The Worth Data 7000 is an advanced data collection and management device designed for various applications, including inventory control, asset tracking, and point-of-sale transactions. This versatile handheld device excels in environments requiring efficiency and reliability, making it a popular choice for businesses looking to optimize their operational workflows.

One of the standout features of the Worth Data 7000 is its robust barcode scanning capabilities. Equipped with a high-quality scanner, it can read a wide range of barcode formats, including 1D and 2D barcodes. This versatility ensures that users can seamlessly integrate the device into existing systems and easily manage different types of inventory, thereby reducing errors and improving data collection accuracy.

The Worth Data 7000 leverages advanced wireless technology, including Bluetooth and Wi-Fi connectivity, allowing for real-time data transfer to cloud-based systems or local servers. This capability is crucial for businesses that require instantaneous updates and access to critical information across multiple locations. The device is also compatible with various mobile applications, enhancing its functionality and enabling users to perform transactions and updates remotely.

In terms of hardware, the Worth Data 7000 features a durable design that meets the demands of industrial and retail environments. Its rugged casing is designed to withstand drops, impacts, and exposure to dust and moisture, ensuring longevity and reliability in challenging conditions. The device is also equipped with an intuitive touchscreen interface, making it user-friendly and accessible, even for those with minimal technical skills.

Another important characteristic of the Worth Data 7000 is its long-lasting battery life. Designed for extended use, the device can operate for hours on a single charge, allowing employees to focus on their tasks without frequent interruptions for recharging. This is particularly beneficial in fast-paced environments where time is of the essence.

Furthermore, the Worth Data 7000 supports a variety of software applications that can be tailored to meet specific business needs. From inventory management systems to customized point-of-sale solutions, the device offers flexibility and scalability for businesses of all sizes.

In conclusion, the Worth Data 7000 stands out as a powerful tool for data collection and management, thanks to its superior barcode scanning capabilities, robust connectivity options, durable design, extended battery life, and flexibility in software applications. Whether for retail, warehouse management, or asset tracking, it is a reliable choice for businesses looking to enhance their operational efficiency and improve data accuracy.