Worth Data 7000 manual @n,m,o,data, Where n m

background for all lines. The total height of the lines will be (1x16)+(3x24)+(1x32)+(1x16)+(2x32)=200 pixels:

this is line 1

this is line 2 this is line 3 this is line 4

this is line 5

this is line 6

this is line 7 this is line 8

The active colors change whenever \cb is received in a prompt. The user default will be used to display all the prompts unless \cb changes the colors. All prompts will start with the user default. The active colors from the last prompt will NOT be carried over to the next prompt.

A typical “prompt” command sequence follows the format below:

0@n,m,o,data

where n m

o

data

is the line number (1-4) you want the prompt displayed on

is the character position (1-20) where you want the prompt displayed

is the character that determines whether the prompt is for display only (0) or is waiting for data input (1) See the table below for valid characters for this position.

is the data you want displayed