Worth Data 7000 manual Data passedterminal, data

Terminal ID is always passed as 0-63. A Terminal ID value of 99 indicates an error.

Once you have the event handler skeletons, you can proceed to add whatever functionality you desire to each event.

You must call the OpenDevice method before any events can be fired.

OnTermBaseRegister

Event:	An attached base station has successfully powered up and communicated with the host
	computer via the serial connection.

OnTermSignIn15

Data passed:terminal

Event: A 15-line terminal has signed in. Terminal ID is passed in terminal.

OnTermSignIn6

Data passed:terminal

Event: A six-line terminal has signed in. Terminal ID is passed in terminal.

OnTermSignIn4

Data passed:terminal

Event: A four-line terminal has signed in. Terminal ID is passed in terminal.

OnTermSignOut

Data passed:terminal

Event: A terminal has signed out. Terminal ID is passed in terminal.

OnTermData

Data passed:terminal, data

Event: A terminal has sent data in response to an Input method call.

OnTermNotSignedIn

Data passed:terminal

Event: A command has been sent to a terminal that is not signed in.

OnTermSequenceError

Data passed:terminal

Event: The one-for-one host prompt/terminal response protocol has been violated. The host cannot send a second Input command until it has received a response from the first Input command. If a base station receives 5 sequence errors in a row, a Host Logic error is generated and the base shuts itself down.

While PromptCom/ActiveX will intercept and prevent most logic errors, they are still possible so you should implement this event handler!

OnTermIllegalCommand

Data passed:terminal

Event: An illegal command has been sent to a terminal.

PromptCom/ActiveX is designed to prevent illegal commands but software is not always perfect and we may not have imagined all the ways in which our customers will want to use it!

OnTermUpArrow

Data passed:terminal

Event: The up-arrow button has been pressed on a terminal. You must issue another Input