Worth Data 7000 manual @1,1,1,ITEM@2,1,1,QTY

Page 42

For example, the command @1,1,1, Enter Quantity would display Enter Quantity starting at position 1 on line 1, then wait for the operator to enter their data.

These are valid entries for the third position character:

0

No data input for this Command, Display ONLY

1

Data input required from the keypad or scanner

2

Only keypad input allowed, start un-shifted

3

Only keypad input allowed, start SHIFTED

4

Only scanner input allowed

5Only accept YES (Enter key or C key) or NO (0 key or B key) keypad response. (Terminal sends 1 for YES, 0 for NO). C and B key are there to facilitate YES/NO keypad entry while scanning with integrated laser.

A

same as 1, but time stamped as prefix (hhmmss)

B

same as 2, but time stamped as prefix (hhmmss)

C

same as 3, but time stamped

D

same as 4, but time stamped

Esame as 4, but can press END key to break-out of scanner- only input mode. Terminal ID + CR is sent to host

S

SHIFTED keypad input or scanner input

p

un-shifted keypad entry with no display (for passwords)

P

SHIFTED keypad entry with no display (for passwords)

RData input required from the RS-232 serial port (waiting for serial input can be bypassed by pressing the ENTER key which will send a NULL data string back to host computer.)

Uses for this are PDF 417 Serial Scanners, and the Cameo Printer’s magnetic stripe input. A POS terminal becomes possible. Scan the credit card and print the receipt, all on the RF Terminal.

KData input from an external serial keyboard that attaches to the serial port. As data is keyed, the characters are displayed on the RF Terminal LCD display.

MThis command is for a printer initialization and magstripe input on the Zebra Cameo printer equipped with the magstripe option.

Here are some rules and useful tips for creating messages (one or more commands per message):

•Re-initialize commands *@, or n@ (where n is the Terminal ID 0-F) clear the buffer for terminal(s) in the Base Station. Following a re-initialization, the host program should re-display of all the screen data necessary to start the application.

•A message with multiple commands is legal and useful. For example, the command “@1,1,0, PLEASE ENTER@2,1,1,QTY” would display PLEASE ENTER on line 1, display QTY on line 2, and then wait for data input. All 6 lines can be filled with one message.

•Messages can be a combination of multiple commands, (i.e. voice messages, initialization, clearing lines, requesting data entry), up to 231 characters in length. A message cannot though, contain an @S command in combination with any other command. A message also should not contain more than 1 request for data entry (third character in command is 1). For example:

@1,1,1,ITEM@2,1,1,QTY

has two data entry “prompt” commands combined. If this message were sent to the RF Terminal, the first data entry prompt (@1,1,1,ITEM) would be executed, but any and all commands after the first data entry prompt in that statement would be ignored without warning – there will be no display or indication of an illegal command.

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Page Page Table of Contents Introduction DifferencesPage Connecting the Base Station to a serial port InstallationInstallation Sequence ComponentsConnecting the Base station… Configuring the Base station…Base station channel… Charge Battery Hit Any Key Using the RF Terminal keypad…Battery Life Indicator Battery too Low to Operate Hit Any Key to Power DownCharging Battery Please Wait……… To change the internal batteryRecharging the battery Battery Charge CompleteOpening screen can be bypassed upon power up. See Chapter Terminal Menu FunctionsFirmware Uxxx HWyy-Rzz Installing the Windows Terminal Loader Utility Installing the RF Terminal Utilities SoftwareUsing the Windows 7000 RF Terminal Loader Utility Windows Demo Programs and RF DLL Programmers LibraryTerminal Eprom Loader Help Uninstall RF System Setup Using the Setup Menu on the RF TerminalSign On Setup One Way Mode RF Site Survey RF Configuration RF Terminal IDSkip Opening Screens RF Terminal ChannelSecurity Code Control Keys OnlyBar Code Options Automatic Check BackCode 3 of 9 Code UPC-A / EAN-13 Options Codabar UPC-E / EAN-8 OptionsCode 5 CodeMSI and Plessey Code 93 / CodeDataBar / RSS-14 Options RS-232 I/O Settings Date Format Set TimeSet Date Year OutputSpeaker Settings Laser OptionsLCD Options Other Settings PreambleNnmm Settings menu PostambleCharacters Reset to Factory DefaultSystem Tools Download FileBase and Relay Setup Using the RF 7000 Configuration Utility@@*EdataaaaaaaaEOT Testing the RF link between base station and hostOperational Theory DataaaaaaaaCRLittle more in depth… How the Two-Way RF System worksBasic RF System communications… Here is how it worksHow the One-Way RF System works Can I change a prompt after it has been sent?How Site Survey works Data Received Was Enter Data?Performance Issues Evaluating your area of planned operationPerforming a Site Survey Press Enter When Ready or F1 to Exit Site Testing in Progress Please Wait…………Relay Stations How Relay Stations work…Relay n Cannot be Is radio traffic contention likely? Relay InstallationDetermining coverage areas for Base Stations and Relays Before you begin programming… Failure Planning Command without an IDOperator Errors Hardware FailuresPlanning Programming for the RF TerminalLOW Level Ascii sequences directly Host to Terminal ProgrammingColor Display Programming @Cfnfnfn...\cb= White Where n m @n,m,o,data@1,1,1,ITEM@2,1,1,QTY Page @2,1,1,ENTER Item no Base Station to Host Formats Serial ReplyBase Station Error Feedback Base Shut Down Due to Host Logic ErrorAddressing a Terminal not SIGNed on ?CR Sequence Error MessageIllegal Command @1,1,1,Scan Serial NumberControl Keys for Possible Programming Base Station Initialized MessagePage PromptCOM/ActiveX Concepts ActiveX Object ProgrammingProperties ActiveX Object Valid valuesValid valuesNone, Even, Odd Color Codes for True, FalseMethods ActiveX Object Line TerminalParameters line, position, prompt,FG,BG Parameters line, position, promptParameters line, position, prompt, FG, BG Parameters line, position, prompt, shiftedParameters font, linecount Parameters FGcolor, BGcolor Events ActiveX ObjectData passedterminal, data Terminal Data PassedClient Utility Programming Considerations Network SetupPromptNET TCP/IP Active X Controls Server CommunicationsConcepts TCP/IP COM Test For Good CommunicationValid values blank or a valid file name ProblemsProperties TCP/IP COM Read OnlyParameters basename, channel, terminal, line Parameters basename, channel, terminal, dataParameters basename, channel, terminal Parameters basename, channel, terminal, countEvents TCP/IP COM Parameters basename, channel, terminal, msgnumParameters basename, channel Data passedbasename, channelData passedbasename, channel, terminal, data OnTermEndKey Portable Printers Cameo and QL 3 Common InformationZebra Cameo Printer Zebra QL 3 Printer Part Number Description Price/RollAssigning Error Messages Why Use Voice Messages and Prompts?Tips for Using Voice Prompts Voice Message OperationsDefault Voice Messages Changing the Battery TroubleshootingProblems with a new installation General ConsiderationsMeaning Action Required Terminal Error MessagesMessage Message Meaning Action RequiredMy response time is poor Troubleshooting specific problemsCan’t communicate at all Im not getting the distance I needGet 6 beeps when the RF Terminal powers up RF Terminal ProblemsProblems reading Bar Codes Reader wont beep when I try to read bar codesIf you have a problem… Have very poor read rates when scanning bar codesRMA #XXXXXX Changing a Base to a Relay Channel and Jumper ChangesOpening a Base RS-422 Termination JumpersAdding Relays Connecting a Relay StationSetting the Relay ID Channel ChangesRouting the Wiring Correct Routing for WiringIncorrect Routing for Wiring Relay Station RS422 Pin-outsRelay Test Plan and Failures Relay Failure Changing the Channel on a Relay Testing the RelayChanging a Relay back to a Base RS-422 TerminationF34 DB25 Null Modem Cable Serial Pin-outsBase Station to Host Pin-outs F36 DB9 Straight CableRelay Station RS422 Pin-outs Firmware UpgradesTerminal Firmware Upgrades Normal Firmware Download for a TerminalFailsafe Firmware Download for a Terminal Code 39 SpecificationsBase Station Firmware upgrades C39Mod 43 Check character calculation for Code Code 39 Advanced Features and FunctionsMod 43 Check Character Value 22 is the Check CharacterAccumulate Mode Full Ascii Extension to CodeCode 93 Specifications Clear EnterA12345b Codabar SpecificationsCode 128 Specifications Codabar start/stop transmissionInterleaved 2 of 5 Code Specifications UCC-128 Shipping Container CodeUPC / EAN Specifications Isbn Specifications Supplemental codesUPC/EAN checksum character MSI/Plessey Specifications How to scan a bar code Laser ScannersLaser Options Aiming the Laser DotAscii Code Equivalent Table BEL

7000 specifications

The Worth Data 7000 is an advanced data collection and management device designed for various applications, including inventory control, asset tracking, and point-of-sale transactions. This versatile handheld device excels in environments requiring efficiency and reliability, making it a popular choice for businesses looking to optimize their operational workflows.

One of the standout features of the Worth Data 7000 is its robust barcode scanning capabilities. Equipped with a high-quality scanner, it can read a wide range of barcode formats, including 1D and 2D barcodes. This versatility ensures that users can seamlessly integrate the device into existing systems and easily manage different types of inventory, thereby reducing errors and improving data collection accuracy.

The Worth Data 7000 leverages advanced wireless technology, including Bluetooth and Wi-Fi connectivity, allowing for real-time data transfer to cloud-based systems or local servers. This capability is crucial for businesses that require instantaneous updates and access to critical information across multiple locations. The device is also compatible with various mobile applications, enhancing its functionality and enabling users to perform transactions and updates remotely.

In terms of hardware, the Worth Data 7000 features a durable design that meets the demands of industrial and retail environments. Its rugged casing is designed to withstand drops, impacts, and exposure to dust and moisture, ensuring longevity and reliability in challenging conditions. The device is also equipped with an intuitive touchscreen interface, making it user-friendly and accessible, even for those with minimal technical skills.

Another important characteristic of the Worth Data 7000 is its long-lasting battery life. Designed for extended use, the device can operate for hours on a single charge, allowing employees to focus on their tasks without frequent interruptions for recharging. This is particularly beneficial in fast-paced environments where time is of the essence.

Furthermore, the Worth Data 7000 supports a variety of software applications that can be tailored to meet specific business needs. From inventory management systems to customized point-of-sale solutions, the device offers flexibility and scalability for businesses of all sizes.

In conclusion, the Worth Data 7000 stands out as a powerful tool for data collection and management, thanks to its superior barcode scanning capabilities, robust connectivity options, durable design, extended battery life, and flexibility in software applications. Whether for retail, warehouse management, or asset tracking, it is a reliable choice for businesses looking to enhance their operational efficiency and improve data accuracy.
Top Page Image Contents