Dometic RM 7655 L, RM 7651 L, RM 7605 L, RM 7601 L Interior light, Changing the decor panel

5.10Interior light

Changing the light bulbs

1. Remove cover.

4.Clip the cover back in place.

1.

2.	90°
2. Detach defective light		3. Fit new light bulb
bulb.

Note:

For 12V DC :

1 light bulb 12V, 2W

Please contact Dometic Service Centres for

replacement light bulbs.

5.11Changing the decor panel

1.Upper door

A

B

-remove the two screws holding the control panel

-unsrcew upper hinge pin (A) and remove the door

-unscrew upper part of the door frame and the panel

-insert new panel and fasten upper part of the door frame

Please note: Carry out following steps BEFORE moun- ting the upper door.

2. Lower door

- unscrew both screws of the middle hinge pin (B)

-Pull out door and hinge in an upwards direction

-unsrcrew lower part of the door frame and remove the decor panel

-insert new panel and fasten lower part of the door frame

-insert lower door and fasten the middle hinge

-insert upper door and fasten the upper hinge pin (A)

-replace the control panel

Dimensions of the panels in mm:

Model		Height	Width	Thickness
RM 7601/ RM 7605	(flat door)	857,0+/-1	491,5+0/-1	3,2 max
		252,5+/-1	491,5+0/-1	3,2 max
RM 7651/ RM 7655	(curved door)	868,0+/-1	500,0+0/-1	2,5 max
		263,0+/-1	500,0+0/-1	2,5 max

13