Dometic RM 7651 L, RM 7655 L Maintenance, Product liability, Environmental hints, Disposal

Page 16

5.14Maintenance

￿Works on gas components and electical installation may only be carried out by authorised personnel. We recommend to contact your Dometic Service Centre.

￿EN 1949 stipulates that the appliance´s gas equipment and it’s associated fume system must be inspected after installation and a certificate issued.

Afterwards a qualified technician must inspect according to EN 1949 every two years and a certificate issued.

It is the user’s responsibily to arrange for inspections after purchase.

￿It is recommended that the gas burner be inspected and cleaned as necessary at least once a year.

We recommend maintenance following an extended shutdown of the vehicle.

5.15Product liability

Product liability of Dometic GmbH does not include damages which may arise from faulty operation, improper alterations or intervention in the equipment, adverse effects from the environment such as changes in temperature and air humidity, which may impact the equipment itself or the direct vicinity of the equipment or persons in the area.

5.16Environmental hints

Refrigerators manufactured by Dometic GmbH are free of CFC/HCFC and HFC. Ammonia (a natural compound of hydrogen and nitrogen) is used in the cooling unit as a coolant. The non-ozone-hazardous cyclopentan is used as a propellant in the manufacture of the PU foam insulation.

5.17Disposal

In order to ensure that the recyclable packaging materials are re-used, these should be sent to the usual local collection system.

The appliance should be transferred to a suitable waste disposal company that will ensure re-use of the recyclable components and proper disposal of the rest.

For eco-friendly draining of the coolant from all absorber refrigeration units, a suitable disposal plant should be used.

5.18Energy-saving tips

￿At an average ambient temperature of approx. 25°C, it is sufficient to operate the refrigerator at the middle thermostat setting (for both gas and mains voltage).

￿Where possible, always store goods that have previously been cooled.

￿Do not position the refrigerator in direct sunlight.

￿Constant circulation of air must be supplied to the refrigerator unit.

￿Defrost regularly.

￿Open the door only for a short time when removing goods from the refrigerator.

￿Run the refrigerator for about 12 hours before filling it.

16

Image 16
Contents Manual Safety instructions Table of Contents Introduction CoolantCleaning Damage in transitUsing the refrigerator ControlsManual energy selection MES RM 76x1 L Automatic and manual energy selection AES RM 76x5 LElectrical operation Mains power12V operation DC AUTO-operation Gas operationExplanations Operation Gas faults RM 76x1 and RMGas operation Temperature setting cooling compartment Storing foodFrame heating Additional functions RM 76x5 onlyMaking ice cubes DefrostingPositioning the storage rack DismantlingDoor locking Switching offWinter operation Interior light Changing the decor panelChanging the doorhang Troubleshooting Maintenance Product liabilityEnvironmental hints DisposalTechnical data Declaration of conformitySide installation InstallationRear installation Draught-free installation CommentInstallation of lower and upper ventila- tion grilles L500 Ventilation and extractionInstalling the ventilation system 500Installation recess Securing the refrigeratorConnections for gas / electrical installation Gas installationGas-pressure Power line connection Electrical installationBattery connection Retrofitting From the manual energy mode to the automatic energy modeSolar control input S+ Wiring diagram Wiring diagram for RM 76x1 LWiring diagram for RM 76x5 L Page Dometic GmbH Der Steinwiese Siegen
Related manuals
Manual 30 pages 57.04 Kb