A. Manual Energy Selection
5.2.2Electrical operation
1. 12V - operation (DC)
The refrigerator should only be used while the motor is running, otherwise the
A
C
1.Set energy selector switch
(A)to 12V .
Operating display “C”, 12V lights “green”.
Appliance is in function.
B
2.Use rotary switch (B) to regulate the temperature in the main refrige- rator compartment.
If the operating display fails to light up ( it lights up “red” at AES models ) the device is not in operation. (For troubleshooting see 5.13)
2. Mains power
This option should only be selected where the supply voltage of the connection for power supply corresponds to the value specified on the data plate. Any difference in values may result in damage the appliance.
A | B |
C
1. Set energy selector switch | 2. Use rotary switch (B) to regulate the |
(A) to 230V . | temperature in the main refrige- |
Operating display “C”, 230V | rator compartment. |
lights “green”. |
|
Appliance is in function. |
|
|
|
If the operating display fails to light up ( it lights up “red” at AES models ) the device is not in operation. (For troubleshooting see 5.13)
7