Whirlpool CGS365H warranty The Oven Light, To replace the oven light, Removing The Oven Door Cont

Page 26

Door stop clip

CARING FOR YOUR RANGE

REMOVING THE OVEN DOOR (CONT.)

2.Hold oven door so that the top edge of each hinge hanger is horizontal. Insert hinge hangers into the front frame hinge slots.

3.Rotate top of door toward range. Slide hinge hangers down onto front frame support pins.

NOTE: Make sure the hinge hangers are fully seated and engaged on the support pins.

4.Insert the door stop clip with the angular surface at the top of the frame hinge slot, then push in the bottom of the clip until flanges are flush with the front frame.

5.Open the door completely and remove the door removal pins. Save door removal pins for future use.

6.Close the door.

Door stop clip

Door removal pin hole

Door removal pin hole

Range

Hinge hanger

Support pins

Front frame hinge slot

Angular

surface of door stop clip

THE OVEN LIGHT

The oven light will come on when you open the oven door.

To turn the light on or off when the oven door is closed:

•Push the oven light switch on the backguard.

To replace the oven light:

1.Unplug range or disconnect power.

2.Remove the glass bulb cover in the back of the oven by turning it counterclockwise.

4.Replace the light bulb cover by turning it clockwise.

3.Remove the light bulb from its socket. Replace the bulb with a 40-watt appliance bulb.

5.Plug in range or reconnect power.

NOTE: The oven light will not work during the Self-Cleaning cycle.

26

Image 26

Contents CONSERVATOR Self-CleaningGas Range By CROSLEYPlease record your model’s information A NOTE TO YOUThank you for buying a CROSLEY appliance wDANGER wWARNING RANGE SAFETYTHE ANTI-TIP BRACKET wWARNINGFor self-cleaning ranges RANGE SAFETYIMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONSSurface burner marker shows which burner you are setting CONTROL PANELPARTS AND FEATURES Left rearUsing the control knobs USING YOUR RANGEUSING THE SURFACE BURNERS Burner heat settingsCHARACTERISTICS OF COOKWARE MATERIALS Home canning informationbig difference Using the right cookware makes aUSING YOUR RANGE USING THE OVENRack placement for specific foods Positioning racks and pansBAKEWARE TYPE USING ALUMINUM FOILBAKEWARE CHOICES BEST USED FORTHE ELECTRONIC TIME-OF-DAY CLOCK/TIMER SETTING THE CLOCKDisplay/clock PRESSUSING THE ELECTRONIC TIMER BAKING/ROASTING USING THE ELECTRONIC TIMER CONTTo cancel the timer YOU SEERoasting meats and poultry BAKING/ROASTING CONTSaving energy PUSH AND TURNPRESS ADJUSTING THE OVEN TEMPERATURE CONTROLHow to determine the amount of adjustment needed Front BROILINGPUSH AND TURN RearBroiling guidelines BROILING CONTRemoving the storage drawer THE OVEN VENTTHE STORAGE DRAWER Replacing the storage drawerBurn Hazard Do not touch the oven during the Self-Cleaning cycle BEFORE YOU STARTUSING THE SELF-CLEANING CYCLE Keep children away from oven during Self-Cleaning cycleSETTING THE CONTROLS TURNTo stop the self-cleaning cycle at any time USING THE SELF-CLEANING CYCLESETTING THE CONTROLS HOW THE CYCLE WORKSCLEANING METHOD CLEANING CHARTCARING FOR YOUR RANGE wWARNINGSurface burners CLEANING CHART CONTCARING FOR YOUR RANGE Oven door glassPorcelain burner cap Burner base Cleaning the surface burnersSEALED SURFACE BURNERS AND COOKTOP Contoured well area Ignitor Gas tube openingSEALED SURFACE BURNERS AND COOKTOP CONT To clean the burnersREMOVING THE OVEN DOOR Before removing the doorTo replace REMOVING THE OVEN DOOR CONTTo remove the door is removed from the rangeTo turn the light on or off when the oven door is closed THE OVEN LIGHTTo replace the oven light Range Hinge hanger Support pins Front frame hinge slot AngularOVEN/BROILER BURNER TROUBLESHOOTINGRANGE DOES NOT WORK SURFACE BURNERSCOOKING RESULTS WHEN SELF-CLEANING YOUR OVENTROUBLESHOOTING DISPLAY MESSAGESREQUESTING ASSISTANCE OR SERVICE IF YOU NEED ASSISTANCE OR SERVICEIF YOU NEED REPLACEMENT PARTS FOR FURTHER ASSISTANCEPage PAGE INDEXTOPIC WARRANTY WARRANTYLENGTH OF WARRANTY CROSLEY GAS RANGE