Whirlpool CGS365H Adjusting The Oven Temperature Control, Using Your Range, Press, You See

Page 14

ADJUSTING THE OVEN TEMPERATURE CONTROL

USING YOUR RANGE

ADJUSTING THE OVEN TEMPERATURE CONTROL

Although your new oven is properly adjusted to provide accurate temperatures, it may cook faster or slower than your old oven.

If you are not satisfied with the baking/roasting results, you can change the offset temperature by following the steps below.

NOTE: DO NOT measure oven temperature with a thermometer. Opening the oven door will lower the oven temperature and give you an incorrect read- ing. Also, the thermometer temperature reading will change as your oven cycles.

1.	PRESS	YOU SEE
1.	Press and hold CLOCK for 5 seconds.

The display will show the time of day. Then you will see the current offset temperature, for exam- ple “00,” if you have not already adjusted the temperature.

(factory setting of “00”)

2. Set the new offset temperature.	PRESS
Press s to raise the temperature or t to lower
the temperature in 10°F amounts. You can set
the temperature change to as low as -30°F or as
high as +30°F. A minus (-) sign will appear before
the number when decreasing the temperature
setting. The minus sign shows the oven will be
cooler by the displayed amount. There is no sign
in front of the number when increasing the tem-
perature setting.

YOU SEE

(example when making oven 10°F cooler)

3. Press CLOCK to enter the offset temperature.

PRESS

YOU SEE

(time of day or minute timer countdown)

How to determine the amount of adjustment needed

The chart at the right tells you how much to adjust the offset temperature to get the cooking results you want. You can figure out cooking results by the amount of browning, moistness, and rising times for baked foods.

	ADJUST BY
	THIS NUMBER
	OF DEGREES
TO COOK FOOD ...	(FAHRENHEIT)

A little more	+10
Moderately more	+20
Much more	+30
A little less	-10
Moderately less	-20
Much less	-30

14

Image 14

Contents CONSERVATOR Self-CleaningGas Range By CROSLEYPlease record your model’s information A NOTE TO YOUThank you for buying a CROSLEY appliance wDANGER wWARNING RANGE SAFETYTHE ANTI-TIP BRACKET wWARNINGFor self-cleaning ranges RANGE SAFETYIMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONSSurface burner marker shows which burner you are setting CONTROL PANELPARTS AND FEATURES Left rearUsing the control knobs USING YOUR RANGEUSING THE SURFACE BURNERS Burner heat settingsCHARACTERISTICS OF COOKWARE MATERIALS Home canning informationbig difference Using the right cookware makes aUSING YOUR RANGE USING THE OVENRack placement for specific foods Positioning racks and pansBAKEWARE TYPE USING ALUMINUM FOILBAKEWARE CHOICES BEST USED FORTHE ELECTRONIC TIME-OF-DAY CLOCK/TIMER SETTING THE CLOCKDisplay/clock PRESSUSING THE ELECTRONIC TIMER BAKING/ROASTING USING THE ELECTRONIC TIMER CONTTo cancel the timer YOU SEERoasting meats and poultry BAKING/ROASTING CONTSaving energy PUSH AND TURNPRESS ADJUSTING THE OVEN TEMPERATURE CONTROLHow to determine the amount of adjustment needed Front BROILINGPUSH AND TURN RearBroiling guidelines BROILING CONTRemoving the storage drawer THE OVEN VENTTHE STORAGE DRAWER Replacing the storage drawerBurn Hazard Do not touch the oven during the Self-Cleaning cycle BEFORE YOU STARTUSING THE SELF-CLEANING CYCLE Keep children away from oven during Self-Cleaning cycleSETTING THE CONTROLS TURNTo stop the self-cleaning cycle at any time USING THE SELF-CLEANING CYCLESETTING THE CONTROLS HOW THE CYCLE WORKSCLEANING METHOD CLEANING CHARTCARING FOR YOUR RANGE wWARNINGSurface burners CLEANING CHART CONTCARING FOR YOUR RANGE Oven door glassPorcelain burner cap Burner base Cleaning the surface burnersSEALED SURFACE BURNERS AND COOKTOP Contoured well area Ignitor Gas tube openingSEALED SURFACE BURNERS AND COOKTOP CONT To clean the burnersREMOVING THE OVEN DOOR Before removing the doorTo replace REMOVING THE OVEN DOOR CONTTo remove the door is removed from the rangeTo turn the light on or off when the oven door is closed THE OVEN LIGHTTo replace the oven light Range Hinge hanger Support pins Front frame hinge slot AngularOVEN/BROILER BURNER TROUBLESHOOTINGRANGE DOES NOT WORK SURFACE BURNERSCOOKING RESULTS WHEN SELF-CLEANING YOUR OVENTROUBLESHOOTING DISPLAY MESSAGESREQUESTING ASSISTANCE OR SERVICE IF YOU NEED ASSISTANCE OR SERVICEIF YOU NEED REPLACEMENT PARTS FOR FURTHER ASSISTANCEPage PAGE INDEXTOPIC WARRANTY WARRANTYLENGTH OF WARRANTY CROSLEY GAS RANGE