Whirlpool CGS365H warranty Sealed Surface Burners And Cooktop, Caring For Your Range

Page 23

SEALED SURFACE BURNERS AND COOKTOP

CARING FOR YOUR RANGE

SEALED SURFACE BURNERS AND COOKTOP

Cleaning the surface burners

•You should routinely remove and clean the burner cap. Always clean the burner cap after a spill- over. Keeping the burner cap clean prevents improper ignition and an uneven flame.

•For the proper flow of gas and ignition of the burner, do not allow spills, food, cleaning agents, or any other material to enter the gas tube opening.

•Gas must flow freely through the gas tube opening for the burner to light properly. You must keep this area free of any soil and protect it from boilovers or spillovers. Always keep the burner cap in place whenever a surface burner is in use.

•Let the cooktop cool before cleaning.

•Do not use oven cleaners, bleach, or rust removers.

•Do not obstruct the flow of combustion and ventilation air.

•Be careful not to allow moisture to collect in the control areas. Moisture can cause the ignitor switches to fail.

•Occasionally check the burner flames for proper size and shape as shown. A good flame

	5 "	is blue in color. If the
	5 "	flames are uneven,
	8	flames are uneven,
		you may need to
		clean the burners.

Porcelain burner cap

Burner base

Contoured well area

Ignitor

Gas tube opening

continued on next page

23

Image 23

Contents By CROSLEY Self-CleaningGas Range CONSERVATORPlease record your model’s information A NOTE TO YOUThank you for buying a CROSLEY appliance wWARNING RANGE SAFETYTHE ANTI-TIP BRACKET wDANGER wWARNINGSAVE THESE INSTRUCTIONS RANGE SAFETYIMPORTANT SAFETY INSTRUCTIONS For self-cleaning rangesLeft rear CONTROL PANELPARTS AND FEATURES Surface burner marker shows which burner you are settingBurner heat settings USING YOUR RANGEUSING THE SURFACE BURNERS Using the control knobsUsing the right cookware makes a Home canning informationbig difference CHARACTERISTICS OF COOKWARE MATERIALSPositioning racks and pans USING THE OVENRack placement for specific foods USING YOUR RANGEBEST USED FOR USING ALUMINUM FOILBAKEWARE CHOICES BAKEWARE TYPEPRESS SETTING THE CLOCKDisplay/clock THE ELECTRONIC TIME-OF-DAY CLOCK/TIMERUSING THE ELECTRONIC TIMER YOU SEE USING THE ELECTRONIC TIMER CONTTo cancel the timer BAKING/ROASTINGPUSH AND TURN BAKING/ROASTING CONTSaving energy Roasting meats and poultryPRESS ADJUSTING THE OVEN TEMPERATURE CONTROLHow to determine the amount of adjustment needed Rear BROILINGPUSH AND TURN FrontBROILING CONT Broiling guidelinesReplacing the storage drawer THE OVEN VENTTHE STORAGE DRAWER Removing the storage drawerKeep children away from oven during Self-Cleaning cycle BEFORE YOU STARTUSING THE SELF-CLEANING CYCLE Burn Hazard Do not touch the oven during the Self-Cleaning cycleTURN SETTING THE CONTROLSHOW THE CYCLE WORKS USING THE SELF-CLEANING CYCLESETTING THE CONTROLS To stop the self-cleaning cycle at any timewWARNING CLEANING CHARTCARING FOR YOUR RANGE CLEANING METHODOven door glass CLEANING CHART CONTCARING FOR YOUR RANGE Surface burnersContoured well area Ignitor Gas tube opening Cleaning the surface burnersSEALED SURFACE BURNERS AND COOKTOP Porcelain burner cap Burner baseBefore removing the door To clean the burnersREMOVING THE OVEN DOOR SEALED SURFACE BURNERS AND COOKTOP CONTthe door is removed from the range REMOVING THE OVEN DOOR CONTTo remove To replaceRange Hinge hanger Support pins Front frame hinge slot Angular THE OVEN LIGHTTo replace the oven light To turn the light on or off when the oven door is closedSURFACE BURNERS TROUBLESHOOTINGRANGE DOES NOT WORK OVEN/BROILER BURNERDISPLAY MESSAGES WHEN SELF-CLEANING YOUR OVENTROUBLESHOOTING COOKING RESULTSFOR FURTHER ASSISTANCE IF YOU NEED ASSISTANCE OR SERVICEIF YOU NEED REPLACEMENT PARTS REQUESTING ASSISTANCE OR SERVICEPage PAGE INDEXTOPIC CROSLEY GAS RANGE WARRANTYLENGTH OF WARRANTY WARRANTY