Maintenance Instructions | ADJUSTMENTS |
Blower Pulley
Bearing
Support Bolts
Adjustment Eye Bolts
Drive Belt Tension Adjustment
Debris Blower Rotation Pinions
The two (2) rotation pinions should slightly contact each other without any resistance.
1.Loosen the set screw of each stop ring on the rotation handle.
2.Keeping the two (2) pinions slightly in contact with each other, position the upper stop ring against the lower support and tighten the screw.
3.Position the lower stop ring close to the lower support and tighten the set screw. The rotation handle should rotate freely without excessive end play.
Debris Blower Rotation Handle
With the rotation pinions properly adjusted, the two
(2)stop rings should be positioned close enough to the lower support to allow the rotation handle to ro- tate freely without excessive end play.
Rotation
Handle
Upper
Stop Ring
& Set Screw
Lower
Support
Lower
Stop Ring
& Set Screw Rotation
Pinions
Debris Blower Rotation Pinions
& Handle Adjustment
66
