Walker SB6670 General Information, Glossary, Identifying Number Locations, Fill In By Purchaser

General Information

HIGHLIGHTED INFORMATION

Walker Manufacturing recommends that any ser- vice requiring special training or tools be performed by an authorized Walker Mower Dealer. There are several general practices to be aware of in the area of safety. Most accidents associated with the oper- ation or maintenance of a Walker product are caused by disregarding basic safety precautions or specific warnings. Such accidents, in most cases, can be prevented by being aware of the dangers present.

Information of special importance has been high- lighted in bold type in this manual. Refer to Safety Instructions for the meanings of DANGER, WARN- ING, CAUTION, IMPORTANT, and NOTE.

GLOSSARY

There are many terms that are either unique to this equipment or that are used as acronyms. The fol- lowing terms and their definitions will help while us- ing this manual.

•FORWARD SPEED CONTROL (FSC) controls the maximum forward speed of the tractor; func- tioning as a cruise control.

•IMPLEMENT refers to the dozer blade, rotary broom, two-stage snowblower, or debris blower used with the tractor with an implement hitch in- stalled.

•LEFT HAND (LH) refers to the left-hand side of the machine when the operator is seated facing forward in the tractor seat.

•MACHINE consists of the implement installed on the tractor, functioning as a single unit.

•POWER TAKE-OFF (PTO) transmits engine power to run the rotary broom, two-stage snow- blower, or debris blower.

•RIGHT HAND (RH) refers to the right-hand side of the machine when the operator is seated fac- ing forward in the tractor seat.

•TRACTOR is the prime mover, including the en- gine, drivetrain, operator seat, and controls to operate the implement.

IDENTIFYING NUMBER LOCATIONS

The implement hitch serial number is affixed to the top of the male hitch assembly, underneath the PTO shield. The dozer blade serial number is af- fixed to the LH side of the hitch box on the back side of the blade. The rotary broom serial number is affixed on the RH side of the pivot bracket. The snowblower serial number is affixed on the RH side of the snowblower head frame. The debris blower serial number is affixed to the top RH side of the hitch. Model and serial numbers are helpful when obtaining replacement parts and maintenance as- sistance. For ready reference, please record these numbers in the space provided.

Implement Hitch Model No. IH6620

Implement Hitch Serial No. _______________

Dozer Blade Model No. DB6660

Dozer Blade Serial No. __________________

Rotary Broom Model No. RB6650

Rotary Broom Serial No. _________________

Two-Stage Snowblower Model No. SB6670

Two-Stage Snowblower Serial No. _________

Debris Blower Model No. DB6680

Debris Blower Serial No. _________________

Date of Purchase _______________________

Fill In By Purchaser

1