Removal and Storage Instructions

PTO Shaft

Welded Sleeve

Hairpin

 

 

 

 

 

 

 

Pivot

Quick Hitch

 

 

Lock Pin

Lever

 

 

 

 

 

 

 

 

Detach Rotary Broom from Implement Hitch

Two-Stage Snowblower

1.Park the tractor on a level surface and lower the snowblower.

WARNING

DO NOT attempt to remove the snow- blower with the tractor engine running. Disengage the PTO clutch, stop the en- gine and remove the ignition key. Wait for all movement to stop before getting off the seat.

To prevent accidental engine starting, dis- connect the fuel solenoid wire [diesel en- gines] or the spark plug wire(s) [gasoline engines].

2.Remove the hairpin from the parallel bar at the adaptor end, and remove the parallel bar from the implement adaptor.

3.Disconnect the driveline from the tractor PTO shaft.

4.Remove the linchpin from the quick hitch latch and place the hitch locking lever in the UN- LOCKED position.

5.Start the tractor engine and carefully back the tractor away from the snowblower.

PTO Shaft

Hitch Locking

Lever

Detach Snowblower from Implement Hitch

Debris Blower

1.Park the tractor on a level surface and lower the debris blower.

WARNING

DO NOT attempt to remove the debris blower with the tractor engine running. Disengage the PTO clutch, stop the en- gine and remove the ignition key. Wait for all movement to stop before getting off the seat.

To prevent accidental engine starting, dis- connect the fuel solenoid wire [diesel en- gines] or the spark plug wire(s) [gasoline engines].

2.Set the parking stands in the most extended po- sition and lock in place.

3.Disconnect the tractor PTO shaft from the de- bris blower input shaft.

4.Remove the linchpin from the quick hitch latch and place the hitch locking lever in the UN- LOCKED position.

5.Start the tractor engine and carefully back the tractor away from the debris blower.

69

Page 69
Image 69
Walker IH6620, SB6670, DB6680, DB6660 Detach Rotary Broom from Implement Hitch, Detach Snowblower from Implement Hitch