Whirlpool 930 Series, 935 Series, 927 Series warranty Setting the Controls, Selecting a wash cycle

Setting the Controls

Operating your dishwasher’s controls properly helps you obtain the best possible washing results. This section tells you how to select wash cycles and options.

Selecting a wash cycle

Press a Cycle pad. The dishwasher starts filling once you press a cycle pad unless you select the delay wash cycle. You may press Option pads as the machine is filling.

CYCLE

RINSE/WASH LATER

For rinsing a few items to be washed one or more days later.

lDo not use detergent.

lWater is not heated

during Rinse/Wash Later.

. Air Dry is automatically selected.

A “@”shows what each cycle includes CYCLE

MAIN FINAL TIME WASH RINSE WASH RINSE RINSE DRY (Minutes

. . 12

LOW ENERGY/CHINA

Single wash for pre-rinsed
or lightly	soiled loads.
l Select	High Temp Wash	.	.	.	.	60+

to heat water in the main wash.

. The water heats to 140°F (60°C) in the final rinse.

NORMAL

	Double	wash for		normal,
	everyday		soiled	loads.
. .	(The Energy Guide label is				.	.	.	.	.
	based	on	this cycle.)							66+

ii l Select High Temp Wash to heat water in the main wash.

l The water heats to 140°F (60°C) in the final rinse.

POTS-N-PANS

-.

.

i!ii

Double	wash for maximum
cleaning of cooked-on or
dried-on foods.		.	.	.	.	.	76+
l The water heats to 140°F
		l
(60%)	in both washes.

l The water heats to 140°F (60%) in the final rinse.

+Cycle time includes dry time and may be longer depending on Ihe temperature of water entering the dishwasher. The cuoler the waler, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown.

14