Whirlpool 935 Series, 927 Series, 930 Series warranty Starting a wash cycle, Stopping the dishwasher

Starting a wash cycle

1.Load the dishwasher. See the ‘Loading Your Dishwasher” section.

2.Spin the spray arms. They should

turn freely.

3.Add detergent. See the “Using the Dispensers” section.

4.Add rinse agent, if needed.

5. Close door firmly until it latches.

6.Run hot water at the sink nearest the dishwasher until water is hot. Turn water off. See the “Energy saving tips” section.

7.Press a Cycle pad. If desired, press one or

-more Option pads. (See the

=-=a

=“Setting the Controls” section.) The dishwasher starts filling once you press a cycle pad

l!!!fzl unless you select the delay wash cycle. You may press Option pads as the machine is filling.

6.The pad indicator glows red when cycle or

1-1option is selected.

Stopping the dishwasher

You can stop your dishwasher anytime during a cycle. All you have to do is:

l Open the door slightly. Wait for any filling or spraying action to stop before opening the door all the way. Close door to con- tinue cycle.

OR

l Press Cancel/Drain. Once pressed, a 2-minute drain starts.

6