Usin Your Microwave Oven
Cont Bnued
Usingthe MinuteTimer
The microwave oven controls can be used as a minute timer. Use COOK TIME at “0”Cook Power for timing up to 99 minutes, 99 seconds.
NOTE: The oven will not operate while the Minute Timer is in use.
1. Touch COOK TIME. The STAGE 1 Indicator will come“O/Oon and the Display will show ‘OH’”
and POWER”. The TIME Indicator will start to flash.
2. Touch Number Pads for the minutes and seconds you want. The Display will show the numbers you touched in the order you touched them. This example shows 1 minute, 45 seconds.
3. Touch COOK POWER. The % POWER Indicator will start to flash.
4. Touch the “0”Number Pad. The small Display will show “00”.This tells you the oven will be operating at 0% power.
5. Touch START/ENTER.
NOTE: If you hear the fan start when you touch START/ENTER, you have not set the Cook Power properly. Touch OFF/CANCEL and start over.
The STAGE 1 and % POWER Indicators will stay on to show you that the timer is running.
The Display counts down to show you how much time is left. During the countdown the oven will be dark and the fan will be off.
When the set time ends, “End”will show on the Display and two short tones and one long tone will sound. (You can stop the tones by opening the door or by touching OFF/CANCEL.) “End”will remain on the Display until the door is opened or OFF/CANCEL is touched. The Display will then show the time of day.
NOTE: Opening the oven door stops the count- down. Close the door and touch START/ENTER to continue the timing countdown.
22