Cookingat lowercookpowers
For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the slower the cooking. Each Number Pad also stands for a different percentage of Cook Power. Many recipes in the Cooking Guide tell you, by number, which Cook Power to use. Recipes in other books and magazines may tell you by name (HI, MED, LO, etc.) or percentage (lo%, 50%, 60%, etc.).
The following chart gives the percentage of Cook Power each Number Pad stands for, and Cook Power name usually used:
Automatic 100% of full power HIGH 9=90% of full power
6=80% of full power
7=70% of full power
5=50% of full power MED 4=40% of full power
3~30% of full power
1~10% of full power LOW O=TIMER (fan and light will be off)
1.Put food in the oven and close the door.
2.Touch COOK TIME. The Display will show the STAGE 1, 0, HI and % POWER Indicators, and the TIME Indicator will start to flash.
3.Touch Number Pads for the cooking time you want. The Display will show the numbers you touched in the order you touched them. This example shows 7 minutes, 30 seconds.
4.Touch COOK POWER. The Display will show the STAGE 1 and HI Indicators and the % POWER Indicator will start to flash. This shows the oven is preprogrammed to cook at full (HIGH) power.
5.Touch a Number Pad for the Cook Power you want. The Display will show what you touched. This example shows you touched Number Pad 5 for 50% of full power.
6.Touch START/ENTER. The STAGE 1 and % POWER Indicators will stay on to show that the oven is cooking in the first cycle at a Cook Power other than HIGH.
The Display counts down the time to show how much cooking time is left in the cycle.
When the cooking time ends, “End”will show on the Display and two short and one long tone will sound. (You can stop the tones by opening the door or by touching OFF/ CANCEL.) “End”will remain on the Display until the door is opened or OFF/CANCEL is touched. The Display will then show the time of day.
13