Display messages
Messages will appear on the display to guide you with your cooking. If you attempt to enter unacceptable instructions, “Err”will appear in the Display. Touch CANCEL and
Audiblesignals
Audible signals are available to guide you when setting and using your oven. A programming tone will sound each time you touch a pad. Two tones will sound between cycles. A reminder tone will sound every 30 seconds after cooking is done to remind you that something has been left in the oven. Four tones signal the end of the Minute Timer function and a Cook or Defrost cycle. If you don’t hear a tone, it is because of incorrectly entered instructions or because the tones have been removed. For example, a tone will not sound If you touch a Number Pad before you touch a Command Pad.
To remove the programming tone:
1.Open the door.
2.Touch CANCEL twice.
3.Touch START.
To remove all tones:
1.Open the door.
2.Touch CANCEL twice.
3.Touch “0”.
4.Touch START.
NOTE: Do not remove all tones if you use the Minute Timer.
To replace the tones: Repeat the steps above.
NOTE: If your electricity goes off, the audible signals will come back on. Repeat steps above if you want to remove tones again.
11