The COOK 2 Indicator will be on during the second cycle. The COOK POWER Indicator will also be on if you are using a Cook Power other than HIGH. The Display counts down the time to show how much time is left in the second cycle.
For 2 of every 10 seconds, the Display will show the Cook Power you selected, if you are using a Cook Power other than HIGH.
When the Cook 2 cycle ends, “End”will show on the Display and 4 tones will sound. (You can stop the tones by opening the door or by touching CANCEL.) “End”will remain on the Display and a reminder tone will sound every 30 seconds (to remind you that food is left in the oven) until the door is opened or CANCEL is touched. The Display will then show the time of day.
Hints for cooking with more than one cycle You can program the cooking cycles in any order. However, when the microwave oven is started, it will automatically go through the cycles in the order of the examples described in this book. For example, if you program COOK 1, KEEP WARM and QUICK DEFROST, the microwave oven will automatically follow this sequence: QUICK DEFROST + (STANDING TIME) + COOK 1 +
KEEP WARM.
Changing or adding instructions
You can change times, Cook Powers, or add cycles any time before or after touching START.
1.Touch the Cook cycle you wish to change or add (COOK 1 or 2).
2.Touch Number Pads for the new time, if desired.
3.Touch COOK POWER, if change is desired.
4.Touch Number Pads for the new Cook Power, or touch COOK POWER again if HIGH is desired.
5.Touch in new cycle and time, if desired.
6.Touch START.
23