Cannon 10297G Mk2, 10295G, 10296G manual Connecting to GAS Supply

Page 30

INSTALLATION INSTRUCTIONS

CONNECTING TO GAS SUPPLY

The cooker is designed to match the depth of standard 600mm worktops. An adaptor backplate should, therefore, be fitted within the shaded area shown to allow the cooker to be pushed fully to the wall.

220mm

70mm

GAS BACKPLATE

POSITION

40mm

635mm

30mm

450mm

Connection to the cooker should be made with an approved appliance flexible connection to BS 669. A length of 0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the hose does not touch the floor.

The temperature rise of areas at the rear of the cooker that are likely to come in contact with the flexible hose do not exceed 70oC.

30

Image 30

Contents Windsor Mk2 Contents Features IntroductionFor Your Safety AlwaysFor Your Safety Oven Timer Operation Guidance on Automatic CookingKnow Your Timer ClockfaceSetting the Time of DAY Auto Cooking Programmes Step Other Notes on Timer Operation Hotplate To USE the HotplateSafety Requirements for Deep FAT Frying HOW to Deal with a FAT FireGrill To USE the GrillRelighting the Burner Oven To USE the OvenStorage and RE-HEATING of Food Cold Start CookingRoasting of Large Poultry ‘COOK CHILL’ DishesOven Cooking Chart Meat and PoultryYeast Mixtures ‘E’ Setting Using the ‘E’ Setting for Slow CookingCare and Cleaning Oven Heat Clean LiningsReplacement of Oven Light Bulb Cooker Finish Cleaning Method Vitreous EnamelHotplate Side Opening Doors Drop Down DoorsProblem Check Something Wrong With Your CookerSomething Wrong Location Installation InstructionsGAS Safety Installation & USE Regulations Provision for VentilationTechnical Data Dimensions GeneralNatural GAS Space for Fixing Cooker HoodsUnpacking the Cooker LevellingViewed from Rear Stability Bracket Connecting to GAS Supply Electrical Connection Connect to a 230-240V A.C. Supply onlyInstallation and Operational Checks Gas Appliances 90/396/EEC Page Page Key Contacts