Cannon 10296G, 10297G Mk2, 10295G manual Setting the Time of DAY

Page 8

OVEN TIMER OPERATION

SETTING THE TIME OF DAY

A

U

T

O

Minute Cook End

Minder Period Time Manual

Minute Cook End

Minder Period Time Manual

Step 1 Make sure all oven controls are turned Off.

Step 2 Check the electricity supply to the cooker is turned on.

Step 3 When switched on the display will show 0.00 and Auto symbol will be flashing intermittently.

Step 4 Press & hold in both the “Minute Minder” & “Cook Period” button together.

Step 5 With the “Minute Minder” & “Cook Period” buttons still held in, press either the “+” or “–” buttons to set the correct time of day.

Step 6 Release all the buttons simultaneously.

THE TIME OF DAY IS NOW SET.

To change the time of day repeat Steps 4, 5 & 6 above.

Note: You cannot adjust the time of day if the timer has been set for an Auto Cooking Programme.

Bell Symbol

Minute Cook End

Minder Period Time Manual

Minute Cook End

Minder Period Time Manual

SETTING THE MINUTE MINDER

Step 1 Ensure the time of day is set correctly.

Step 2 Press and hold the Minute Minder Button, a symbol will light up.

Step 3 With the “Minute Minder” button held in, set the required Minute Minder time using the “+” and “–” buttons.

Release all buttons and the timer display will revert back to the time of day. Bell symbol will remain lit to signify that a Minute Minder period has been set.

At the end of the set time a bleeping sound will be heard, and the symbol will flash for approximately 2 minutes.

After approximately 2 minutes the bleeping sound will stop and the symbol will go out automatically.

Step 4 To cancel the bleeping sound within the two minutes press the Minute Minder button.

Note 1 When the Minute Minder has been set, the time remaining can be checked at any time by simply pressing the Minute Minder button.

Note 2 If necessary the Minute Minder can be cancelled before the tone sounds by pressing and holding the Minute Minder button and then at the same time pressing the “–” button until 0.00 appears in the display window.

8

Image 8
Contents Windsor Mk2 Contents Features IntroductionFor Your Safety AlwaysFor Your Safety Oven Timer Operation Guidance on Automatic CookingKnow Your Timer ClockfaceSetting the Time of DAY Auto Cooking Programmes Step Other Notes on Timer Operation Hotplate To USE the HotplateSafety Requirements for Deep FAT Frying HOW to Deal with a FAT FireRelighting the Burner GrillTo USE the Grill Oven To USE the OvenCold Start Cooking Roasting of Large PoultryStorage and RE-HEATING of Food ‘COOK CHILL’ DishesOven Cooking Chart Meat and PoultryYeast Mixtures ‘E’ Setting Using the ‘E’ Setting for Slow CookingReplacement of Oven Light Bulb Care and CleaningOven Heat Clean Linings Cooker Finish Cleaning Method Vitreous EnamelHotplate Side Opening Doors Drop Down DoorsProblem Check Something Wrong With Your CookerSomething Wrong Installation Instructions GAS Safety Installation & USE RegulationsLocation Provision for VentilationNatural GAS Technical Data DimensionsGeneral Space for Fixing Cooker HoodsViewed from Rear Stability Bracket Unpacking the CookerLevelling Connecting to GAS Supply Electrical Connection Connect to a 230-240V A.C. Supply onlyInstallation and Operational Checks Gas Appliances 90/396/EEC Page Page Key Contacts