Reminder, Replace, Filter Clean, Features

Decorative Mesh Filter Clean Reminder (metal mesh filter)

Whether your hood is installed as an exhaust or purifying unit, a decorative mesh filter is fitted by the factory. This mesh filter is intended to filter out residue from cooking. It need not be replaced on a regular basis but is required to be kept clean. After every 30 hours of use the Filter Clean Reminder function in the microprocessor will automati- cally remind you by a flashing F when the mesh filter needs to be cleaned. The filter can be cleaned by hand with non-abrasive soap or in a dishwasher. A heavily soiled filter should also be soaked in grease cutting detergent prior to cleaning.

Reminder

Decorative Mesh Filter Clean Indicator

When F flashes on display, the mesh filter installed is required to be cleaned. This will occur after every 30 hours of use.

Re-setting Function

Reset the filter clean reminder timer when filter is cleaned


and re-installed. With hood off,		press and hold	for
approximately 5 seconds until F		on display disappears
.	. The filter clean reminder function is now reset

and a new 30 hours elapse cycle is initiated.

Clean Filters

display < F > flashes

To Reset

hold 5 sec. display from < F > to < >

and Replace

Charcoal Filter Replace Reminder (charcoal filter, if installed)

When your hood is installed as a recirculating unit it must be fitted with a charcoal filter to purify exhaust and fumes from cooking and then recirculate the air within the home. This charcoal filter must be replaced after every 120 hours of use. The charcoal filter should never be cleaned or placed in a dish washer.

The charcoal filter replace reminder function in the microprocessor needs to be switched on. When switched on, the microprocessor will elapse and count usage time. When charcoal filter replacement is needed a flashing C will appear on the display.

Filter Clean

Setting the Charcoal Filter Replace Reminder


With hood off, hold	for approximately 5 seconds.
The display will change from		(exhaust mode) to

C(recirculating mode). This indicates that the elapse timer function is switched on and charcoal filter is being used.

Set Mode

hold 5 sec. display from < - > to < C >

Controls –

Charcoal Filter Replace Indicator

When the display C starts flashing, the charcoal filter needs to be replaced. Purchase replacement charcoal filters from Zephyr.

Re-setting Function

After charcoal filter is replaced, with hood off, press and

hold for apprimately 5 seconds until C on the

display disappears . The filter change reminder is now re-set and a new 120 hour elapse cycle is initiated.

ChangeSetModeFIlter

display < C > flashes

To Reset

hold 5 sec. display from < C > to < >

Features &

ZGE-E36AS290, ZGE-E36AS, ZGE-E30AS290, ZGE-E30AS specifications

The Zephyr ZGE series, comprising models ZGE-E36AS, ZGE-E36AS290, ZGE-E30AS290, and ZGE-E30AS, represents a fusion of cutting-edge kitchen technology and sophisticated design, catering to culinary enthusiasts and home chefs alike.

The ZGE-E36AS is a standout model known for its powerful performance and sleek aesthetics. It features a robust ventilation system that effectively clears the air of smoke and odors while cooking. With a CFM rating of up to 800, it ensures that even the heaviest cooking sessions are met with efficient air circulation. The model includes LED lighting that illuminates the cooking surface, enhancing visibility during meal preparation.

The ZGE-E36AS290 takes this signature design a step further, equipped with advanced smart technology. This model supports Wi-Fi connectivity, allowing users to control the ventilation settings remotely via a dedicated app. It also features an intuitive touch control panel that simplifies operation and enables real-time monitoring and adjustments, making cooking easier and more efficient.

Moving on to the ZGE-E30AS290, this model is designed with versatility in mind. It boasts a compact form factor without sacrificing power. This range hood is ideal for kitchens with limited space, yet it provides an impressive 600 CFM extraction capability. Features such as a dishwasher-safe baffle filter and easy maintenance make the ZGE-E30AS290 a practical choice for any modern home.

Finally, the ZGE-E30AS is a classic solution that delivers reliability and performance. It incorporates a multi-speed fan system, allowing users to adjust the ventilation speed according to the cooking intensity. Its whisper-quiet operation ensures that ambient noise levels remain minimal, creating a serene cooking environment. Additionally, the model's stainless steel construction is not only aesthetically pleasing but also ensures durability and ease of cleaning.

Across all models, Zephyr emphasizes energy-efficient technology, promoting sustainability while enhancing kitchen functionality. The range is designed to blend seamlessly with various kitchen styles, from contemporary to traditional, ensuring they complement any interior design.

In summary, the Zephyr ZGE series is characterized by innovative technology, powerful ventilation, user-friendly features, and elegant designs. These models elevate the cooking experience, making them a valuable addition to any kitchen.