Bakers Pride Oven MT-200 service manual Electrical Connections

Page 10

Convection Oven

Installation

3.Clean all substances, including glue residue. Do not use abrasive substances.

4.Position the machine so that it is perfectly level and set the height by means of the leveling feet.

Electrical Connections

The oven is setup for operation at the voltage set forth on the technical data plate. All ovens are provided with a power cord.

The flexible cable for connection to the electrical mains must not have characteristics which are less than those of a type with rubber insulation mod. H07RN F and it must have a section which corresponds with that set forth in the section “Technical Data” of the oven. The cable must also be anchored to the frame with the cable clamp, the screw of which can be reached through a hole in the frame. It must in any case

8

Image 10

Contents Convection Oven Warranty Information Limited ONE Year WarrantyTable of Contents Safety Signs and Messages Safety PrecautionsIntroduction Safety Standards Power Supply Terminal BoardTechnical Data Data PlateOperation Controls and IndicatorsGeneral Instructions for Use Switching Off Start-Up and UseEnvironmental Standards InstallationSafety Standards Transport and UnpackingInstallation Instructions Electrical Connections Convection Oven Installation Protection of the Auxiliary Electrical Circuit Automatic Safety and Control Devices of the OvenOven Chamber Safety Thermostat Protection of the Chamber FanMaintenance Routine MaintenanceOven Chamber Cleaning Cleaning the Door Glass Cleaning the FanTroubleshooting Problem Probable Remedy CauseRepair Procedures Replacement of Motors30W Motor Outer CoveringsBulb, Heating Element and Motor Fan Heating ElementsElectro-Mechanical Controls Replacement of Chamber Light and Glass GasketChamber Face Gasket Replacement Parts POS Code BKI # Description Wiring Diagrams Convection Oven Box 80400, Simpsonville, S.C -0400, USA LI0131/0808