Bakers Pride Oven MT-200 service manual Installation Instructions

Page 9

Convection Oven

Installation

 

 

Installation Instructions

1.Place the machine in its place of intended use in compliance with the following instructions:

Check that there is enough space (minimum 8”) from any walls or obstacles which may prevent proper air flow.

Check that maintenance can be performed with a certain freedom of movement.

Avoid placing the oven in places with poor air circulation, in places exposed to sunlight, where there are high temperatures, near heat sources or in windy locations.

Ambient air temperature must not exceed 89°F. Above that temperature, proper operation of the oven cannot be ensured.

Always install the oven under a properly operating aspiration hood for the extraction of vapors.

2.Remove the film which covers some parts of the oven before starting to use it.

7

Image 9
Contents Convection Oven Limited ONE Year Warranty Warranty InformationTable of Contents Safety Precautions Safety Signs and MessagesIntroduction Technical Data Power Supply Terminal BoardSafety Standards Data PlateControls and Indicators OperationGeneral Instructions for Use Start-Up and Use Switching OffSafety Standards InstallationEnvironmental Standards Transport and UnpackingInstallation Instructions Electrical Connections Convection Oven Installation Oven Chamber Safety Thermostat Automatic Safety and Control Devices of the OvenProtection of the Auxiliary Electrical Circuit Protection of the Chamber FanRoutine Maintenance MaintenanceOven Chamber Cleaning Cleaning the Fan Cleaning the Door GlassProblem Probable Remedy Cause TroubleshootingReplacement of Motors Repair ProceduresBulb, Heating Element and Motor Fan Outer Coverings30W Motor Heating ElementsReplacement of Chamber Light and Glass Gasket Electro-Mechanical ControlsChamber Face Gasket Replacement Parts POS Code BKI # Description Wiring Diagrams Convection Oven Box 80400, Simpsonville, S.C -0400, USA LI0131/0808