Bakers Pride Oven MT-200 service manual Convection Oven Installation

Page 11

Convection Oven

Installation

be positioned in such a way that at no point does it reach a temperature which is 122°F greater than the ambient temperature. It must be type SJTO plug 20A 250V P section 3xAWG12.

The connection to the electrical line must be made by placing an automatic switch of sufficient capacity (see “Technical data” of the oven) and with an opening distance between contacts of at least 3 mm.

Also, during operation of the oven, the power supply must not vary from the nominal voltage value by ±10%.

The oven MUST be earthed by means of the terminal which carries the earth symbol on the connection board.

It must also be inserted in an equipotential system (the efficiency of which must be checked in accordance with current standards) using the terminal with the equipotential symbol. It is located near the electrical cable entry on the panel of the oven bottom.

The manufacturer will not be held liable if this accident prevention standard is not adhered to.

9

Image 11
Contents Convection Oven Limited ONE Year Warranty Warranty InformationTable of Contents Introduction Safety PrecautionsSafety Signs and Messages Data Plate Power Supply Terminal BoardTechnical Data Safety StandardsGeneral Instructions for Use Controls and IndicatorsOperation Start-Up and Use Switching OffTransport and Unpacking InstallationSafety Standards Environmental StandardsInstallation Instructions Electrical Connections Convection Oven Installation Protection of the Chamber Fan Automatic Safety and Control Devices of the OvenOven Chamber Safety Thermostat Protection of the Auxiliary Electrical CircuitRoutine Maintenance MaintenanceOven Chamber Cleaning Cleaning the Fan Cleaning the Door GlassProblem Probable Remedy Cause TroubleshootingReplacement of Motors Repair ProceduresHeating Elements Outer CoveringsBulb, Heating Element and Motor Fan 30W MotorChamber Face Gasket Replacement of Chamber Light and Glass GasketElectro-Mechanical Controls Replacement Parts POS Code BKI # Description Wiring Diagrams Convection Oven Box 80400, Simpsonville, S.C -0400, USA LI0131/0808