Bakers Pride Oven MT-200 service manual Electro-Mechanical Controls, Chamber Face Gasket

Page 19

Convection Oven

Maintenance

Electro-Mechanical Controls

All the electric components are visible. To replace them it is necessary to disconnect the attachments, remove the knobs, unscrew the fastening screws or nuts and replace them.

For the adjustable thermostat, safety thermostat and thermometer, unscrew the guard and the supports and remove the bulbs. Once they have been replaced use high-temperature resistant silicone to seal the holes. After replacement, reseal the holes for the passage of the capillaries with high temperature silicone.

Chamber Face Gasket

It is simply pressed in. Pull to remove it. NB: Before removing it, note its position carefully so as to place the new one in the same position.

Replacement of Chamber Light and Glass Gasket

Check and replace the glass gasket and any lights in the oven chamber.

17

Image 19

Contents Convection Oven Limited ONE Year Warranty Warranty InformationTable of Contents Safety Signs and Messages Safety PrecautionsIntroduction Data Plate Power Supply Terminal BoardTechnical Data Safety StandardsOperation Controls and IndicatorsGeneral Instructions for Use Start-Up and Use Switching OffTransport and Unpacking InstallationSafety Standards Environmental StandardsInstallation Instructions Electrical Connections Convection Oven Installation Protection of the Chamber Fan Automatic Safety and Control Devices of the OvenOven Chamber Safety Thermostat Protection of the Auxiliary Electrical CircuitRoutine Maintenance MaintenanceOven Chamber Cleaning Cleaning the Fan Cleaning the Door GlassProblem Probable Remedy Cause TroubleshootingReplacement of Motors Repair ProceduresHeating Elements Outer CoveringsBulb, Heating Element and Motor Fan 30W MotorElectro-Mechanical Controls Replacement of Chamber Light and Glass GasketChamber Face Gasket Replacement Parts POS Code BKI # Description Wiring Diagrams Convection Oven Box 80400, Simpsonville, S.C -0400, USA LI0131/0808