Bakers Pride Oven MT-200 service manual Start-Up and Use, Switching Off

Page 7

Convection Oven

Operation

 

 

Start-Up and Use

1.To start the oven, press the main switch (3) ON/OFF.

2.Set the cooking time by turning the time setting knob (1).

3.Then use knob (2) to set the desired cooking temperature. If knob (2) is left in position ‘0’, only the light and fan will operate, and the oven chamber will not heat up.

Switching Off

1.Cooking ends automatically when the cooking time set on knob (1) has expired.

2.Nonetheless, turn all knobs to “O” and turn off the main switch (3) ON/OFF.

5

Image 7
Contents Convection Oven Limited ONE Year Warranty Warranty InformationTable of Contents Safety Signs and Messages Safety PrecautionsIntroduction Data Plate Power Supply Terminal BoardTechnical Data Safety StandardsOperation Controls and IndicatorsGeneral Instructions for Use Start-Up and Use Switching OffTransport and Unpacking InstallationSafety Standards Environmental StandardsInstallation Instructions Electrical Connections Convection Oven Installation Protection of the Chamber Fan Automatic Safety and Control Devices of the OvenOven Chamber Safety Thermostat Protection of the Auxiliary Electrical CircuitRoutine Maintenance MaintenanceOven Chamber Cleaning Cleaning the Fan Cleaning the Door GlassProblem Probable Remedy Cause TroubleshootingReplacement of Motors Repair ProceduresHeating Elements Outer CoveringsBulb, Heating Element and Motor Fan 30W MotorElectro-Mechanical Controls Replacement of Chamber Light and Glass GasketChamber Face Gasket Replacement Parts POS Code BKI # Description Wiring Diagrams Convection Oven Box 80400, Simpsonville, S.C -0400, USA LI0131/0808