Vermont Casting VCS3006, VCS6006, VCS5006BI, VCS3506, VCS5016 Care & Maintenance, Burner Adjustment

Page 32

Care & Maintenance

Maintenance

BURNER ADJUSTMENT

NOTE: It may be necessary to adjust the burners periodically, to compensate for variables in gas characteristics. If you notice that the burner flame pattern is irregular (see Figs. 9a, 9b & 9c), it may be necessary to adjust the air shutter opening at the front of the venturi tubes.

The shutters are accessible under the control panel at the

front of the Grill (see Fig. 20).

Fig. 20

Use a screwdriver to loosen the locking screws. Open the shutter just enough to achieve the desired soft, blue flames. Make adjustments in small increments and allow the burner to come up to operating temperature (10 min.) before

	making further adjustments.	Loosen the
	making further adjustments.	locking screw
		locking screw

Turn shutter clockwise to open

If burners are removed for cleaning or adjustment, always confirm that they have been reinstalled correctly over the valve outlets (see Fig. 21). The valves should extend into the burner venturis 1/4" minimum.

NOTE: Similar adjustment can be made to Rotisserie and/or Side Burners, if so equipped.

Venturi Tube

Valve

Outlet

1/4”

Fig. 21

Page 21

Image 32

Contents USER’S Manual for Models Page Signal Words Safe Locations for USE of this Outdoor Grill Safe USE of LP Propane GAS Safe USE of Natural GASPrevention of Burns SafetyElectrical Safety Table of Contents Fuels Additional Warnings Safety Hooking Up to the LP Propane Gas Supply For Your Safety LP Propane GAS Supply ConnectionGas Hookup To Disconnect Testing for GAS LeaksNatural GAS Supply Connection To Connect Operation Control Functions Propane Tank ValveBurner Control Valves see Fig Activating the Igniter Electronic Ignition SystemLighting the Main Burners Match Lighting the Main Burners Turning the Burners OFFFLARE-UPS Match Lighting the Rotisserie Burner Lighting the Rotisserie Burner if equippedTo Start the Rotisserie Burner Rotisserie Setup if equipped Lighting the Side Burner if equipped Shutting the Burner OFFCooking Methods of CookingPreparing Food for the Grill Grilling Tips Cooking Time Chart BeefSausage Vegetables Main Burner Care & MaintenanceCare & Cleaning Burners Cooking Grids Rotisserie Burner if equippedSide Burner if equipped Porcelain Enamel Castings Drip TrayStainless Steel Panels Troubleshooting Guide Problem Potential Cause Action RequiredIt may short out. Replace the electrode Year Warranty VCS3506BI / VCS5006BI Assembly Assemble Fascia Brackets Parts Required Burner Adjustment Assemble the Rear Panel Parts Required Assemble the Grease Tray Front and Handle Parts Required Assemble the Grill Unit to the Enclosure Install Internal Components and Knobs Parts Required