Pitco Frialator L20-281 manual GasConnection, Fuel Supply Line Leak and Pressure Testing

Page 4

GasConnection

Your fryer will give you peak performance when the gas supply line is of sufficient size to provide the correct gas flow. The gas line must be installed to meet the local building codes or National Fuel Gas Code ANSI Z223.1 Latest Edition. In Canada, install the fryer in accordance with CAN/CGA-B149.1 or .2 and local codes. Gas line sizing requirements can be determined by your local gas company by referring to National Fuel Gas Code, Appendix C, Table C-4 (natural gas) and Table C-16 (propane). The gas line needs to be large enough to supply the necessary amount of fuel to all appliances without losing pressure to any appliance.

WARNING

NEVER supply the fryer with a gas that is not indicated on the data plate. Using the incorrect gas type will cause improper operation. If you need to convert the fryer to another type of fuel, contact your dealer.

Fuel Types - Each fryer is equipped to work with one type of fuel. The type of fuel with which the appliance is intended to operate is stamped on the data plate attached to the inside of the door.

NOTICE

NEVERuseanadaptortomakeasmallergassupplylinefitthecookerconnection. Thismay not allow proper gas flow for optimum burner operation, resulting in poor cooker perfor- mance.

Quick Disconnect Gas Connection

Gas fryers equipped with casters must be installed with connectors that comply with the Standard for Connectors for Movable Gas Appliances, ANSI Z223.1 Latest Edition, and Addenda Z21.69A Latest Edition. This connection should include a quick disconnect device that complies with the Standard for Quick Disconnect Devices for Use With Gas Fuel , ANSI Z223.1 Latest Edition. When installing a quick disconnect you must also install a means for limiting the movement of the fryer. This device will prevent the gas line or the quick disconnect from being strained. The restraining device should be attached to the cooker on the back panel.

Fuel Supply Line Leak and Pressure Testing

The fuel supply system must be tested before the fryer is used. If the fuel line is going to be tested at a pressure greater than (>)1/2 PSIG (3.45 kPa), make sure that the fryer is disconnected from the fuel line. If the fuel line is to be tested at a pressure equal to or less than (<) 1/2 PSIG (3.45 kPa), the fryer can be connected but the unit's gas valve must be shut. Test all gas line connections for leaks with a solution of soap and water when pressure is applied.

ELECTRICAL CONNECTION

The electrical service used by the fryer must comply with local codes. If there are no local codes that apply, refer to the National Electrical Code (NEC), ANSI/NFPA 70 to install the service. In Canada refer to CSA Standard C22.1 and local codes. Wiring diagrams are provided inside the fryer control box. The power requirements for the fryer are shown below.

 

North America

International

Input Voltage

120 VAC, 60Hz

220 (or 240) VAC, 50Hz

Current per fryer

0.5 Amps

0.5 Amps

Filter System

7.0 Amps

4.0 Amps

The fryer must be grounded in accordance with local code; if there is not a local code, comply with NEC ANSI/NFPA No. 70-1990. It is advised that this power supply be plugged into a wall receptacle that is controlled by the ventilation

control. This will prevent the fryer from being operated without the ventilator on.

L20-281rev0(4/30/05)

2

 

Image 4
Contents Covering Models SG18HP and SGM Series For Your Safety Installation CheckingyournewfryerGasConnection Fuel Supply Line Leak and Pressure TestingElectrical Connection Ventilation and Fire Safety Systems Ventilation and Fire Safety ReferencesGas pressure check Typesoffireextinguishers Detection EquipmentLightinginstructions Filling the fryer with liquid shortening FryerShut-DownFilterprocedures DrainingatankPreparing the filter for use Daily Fryer CleaningWeekly Boilout Manuel d’Installation Pour Votre Sécurité Avertissement Vérification DE LA Nouvelle FriteuseDistances de sécurité Remarque Raccordement DU GAZRaccordement Électrique Ventilation ET Systèmes DE Sécurité Contre LES Incendies Vérification de la pression du gaz Typesdextinteurset MatérieldedétectionINSTRUCTIONSD’ALLUMAGE Avis Éteindre laFriteuseFiltrage Remarque Vidanger UNE CuvePréparation du filtre Nettoyagequotidien NettoyagedelafriteuseNettoyagehebdomadaireébouillantage

L20-281 specifications

The Pitco Frialator L20-281 is an exceptional commercial fryer designed for high-performance frying in busy kitchen environments. As a trusted name in the foodservice industry, Pitco provides quality equipment that meets the rigorous demands of restaurants, catering services, and food trucks. With its robust construction and a variety of innovative features, the L20-281 stands out as a reliable solution for cooking enthusiasts and professionals alike.

One of the main features of the Pitco Frialator L20-281 is its impressive frying capacity. This model can handle up to 40 pounds of oil, which is ideal for frying large batches of food quickly. The spacious frying area allows chefs to prepare a wide range of menu items, from crispy fried chicken to golden french fries, without compromising on quality or efficiency.

Equipped with dual baskets, the fryer allows for versatile cooking options. The baskets can be used simultaneously, enabling chefs to fry different food items at once, streamlining operations during peak hours. This feature not only enhances productivity but also minimizes wait times for customers, making it a valuable addition to any busy kitchen.

The L20-281 utilizes advanced technologies that promote energy efficiency and consistent cooking results. Its temperature control system ensures that oil temperatures remain stable, delivering perfectly cooked food every time. Moreover, the fryer is designed with a high-efficiency heating element that reduces energy consumption, making it an environmentally friendly option for businesses looking to decrease operational costs.

Safety is another key aspect of the Pitco Frialator L20-281. The fryer is equipped with a built-in thermostat that prevents overheating, alongside a durable stainless steel construction that withstands the rigors of daily use. Additionally, the unit includes a modern oil filtration system that extends the lifespan of frying oil by removing food particles and impurities, ensuring that each batch of fried goods is fresh and flavorful.

Another characteristic of the L20-281 is its user-friendly design. The fryer features easy-to-read digital controls that allow operators to set and monitor cooking times and temperatures with precision. This intuitive interface helps streamline cooking processes, reducing training time for new staff and enhancing overall kitchen efficiency.

In conclusion, the Pitco Frialator L20-281 is a top-tier commercial fryer that excels in performance, efficiency, and safety. Its capacity, dual basket feature, advanced technologies, and user-friendly controls make it a standout choice for foodservice operators seeking a reliable frying solution. With its commitment to quality and innovation, Pitco continues to set the standard in fryer technology.