A4) HEBTKP, HESBTKP, HECBTK, HECBTKMB & HEBTA TRIMS
HECBTK | - Cast bay window and grills in classic black trim kit | ||||
HECBKMB | - | Cast bay window and grills in midnight black porcelain enamel trim kit | |||
HESBTKP | - | Steel | bay | window | with polished brass and cast grills in classic black trim kit |
HEBTKP | - | Steel | bay | window | and bay louvres with polished brass trim kit |
Install the bay window after all other installation work has been completed, thoroughly checked, and tested for operation, leaks and proper installation requirements.
DO NOT REMOVE EXISTING GLASS WITH FRAME
HEBTKP | HESBTKP | HECBTK & | |
| HECBTKMB | ||
|
|
| |
|
|
|
|
|
|
|
|
Fig. 30 | Fig. 31 | Fig. 32 |
HECBTKP, HECBTKMB and HESBTKP Trim Assembly
1)Reposition controls.
a)Remove the Fan Speed Control Box (Fig. 33)
b)Attach the Fan Speed Control Box to the Bracket (Fig. 34) and install the Bracket into the Cabinet. Only for RN/RP VALVE units:
c)Install the Control Knobs Extensions onto the appropriate Control Valve Knobs (Fig. 35)
On units fitted with a Honeywell brand control valve the location of the control knobs and the ignitor button may vary slightly from those shown in Fig. 35. The Honeywell extension pieces are visually different in design and are not interchangeable with the RN/RP knobs shown in Fig. 35.
2)Install the hanging brackets, as per Fig. 36.
3)Install the two ceramic pieces inside the bay window, as per Fig.32.
4)Install the bay window by hanging it onto the lower tabs of the hanging brackets, as per Fig. 37.
5)Install the upper grill by engaging the obround holes with the upper tabs of the hanging brackets, as per Fig. 38.
6)Install brass trim to the steel frame as per Fig. 39 (Only for HESBTKP trim)
10003929 | 22 |