A2) RHEBSL & RHEBXL TRIMS
TRIM ASSEMBLY
RHEBSL
1.Install trim channels (left and right sides). Use two screws to assemble each piece.
2.Slide on the trim top channel and fasten it from the back side.
3.Install the trim top deflector and use two screws to fasten it. (Fig. 26)
4.Remove ALL plastic protective covering from brass trim.
Trim Top Deflector
Trim Frame Top Section
Side View | Fig. 26 |
RHEBXL
To install the kit you do not have to remove any piece of brass, you just add the external pieces.
Remove the frame trim from the unit if it is already installed.
1.Install trim channels (left and right sides)by removing the two screws that hold the side brass trim and put them back to hold both parts.
2.Slide on the trim top channel and fasten it from the back side.
3.Remove the two screws that hold the top brass trim.
4.Install the two brackets to the studs in the bottom of the top channel. Use the nuts supplied with the kit.
5.Reinstall the two screws to hold the top trim channel.
TRIM REPLACEMENT PARTS LIST
ALL repair parts will be available from your local dealer.
When ordering, always give the following information: Model and serial number, part description with finish and part number;
KEY | DESCRIPTION | RHEBSLP | RHEBSLA | RHEBXLP(1) | RHEBXLA(1) |
|
|
|
|
|
|
1 | Trim Frame Flat Black | 57926 | 57926 | - | - |
|
|
|
|
|
|
2 | Trim Top Deflector | - | - | ||
|
|
|
|
|
|
3 | Trim Top Channel | 57864 | 57844 | - | - |
|
|
|
|
|
|
4 | Trim Side Channel | 57862 | 57843 | - | - |
|
|
|
|
|
|
5 | Trim Outer Top Channel | - | - | 57861 | 57845 |
|
|
|
|
|
|
6 | Trim Outer Side Channel | - | - | 57863 | 57846 |
|
|
|
|
|
|
7 | Fasteners Package (Not Shown) | 54618 | 54618 | 57633 | 57633 |
|
|
|
|
|
|
(1)RHEBXLP or RHEBXLA to be used with RHEBSLP or RHEBSLA trims.
(2)SL trim dimensions are for openings smaller than 271/2"H x 401/2" W (700mm x 1030mm)
(4)XL trim dimensions are for openings smaller than 30"H x 455/8" W (765mm x 1160mm)
5
3
1
2
6 | 4 | 4 | 6 |
10003929 | 20 |