Vermont Casting IRHEDV32 installation instructions Flame Adjustment, Flame Characteristics

FLAME ADJUSTMENT

Flame adjustment is accomplished by rotating the Hi/Lo adjustment knob located near the centre of the gas control. (Fig. 18)

	I	H
Turn		Turn clockwise
counterclockwise
		to lower
to increase
		flame height.
flame height.

SIT Valve	LO
Turn			Turn clockwise
counterclockwise
			to increase
to decrease
	I	L	flame height.
flame height.
	H	O
Honeywell
Valve			Fig. 18

FLAME CHARACTERISTICS

It is important to periodically perform a visual check of the pilot and the burner flames. Compare them to the pictorials illustrated below (Fig.19 and 20). If any of the flames appear abnormal call a service person.

SIT Pilot

3/8" - 1/2"

PSE Pilot

Fig. 19

IRHEDV32

Fig. 20

10003929 11