Preparation before Installation

NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING.

-Decide the location of the venting pipe from the hood to the outside. (Figure 1)

-A straight, short venting run will allow the hood to perform more efficiently.

-Try to avoid as many transitions, elbows, and long run as possible. This may reduce the performance of the hood.

-Temporarily wire the hood to test for proper operation before installing. Refer to step 8 & 9 and figure 8 on page 7.

-Important: Peel any protective film off the hood.

-Use duct tape to seal the joints between pipe sections.

-If necessary, prepare back wall frame with cross framing lumber for secure installation. Refer to Table 1 and measurements on Page 13 to decide the level of the lumber. (Figure 2)

-Loosen hood-mounting brackets at the back of the hood, adjust brackets and tighten screws as shown in Figure 3.

-If necessary, remove the rubber stand on the back of the hood and discard. (Figure 4)

Hood Installation

CAUTION: If it is necessary to move the cooking range to install the hood, be sure to turn off the power on an electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.

1.Using references in Table 1 and measurements on Page 13, mark the leveling locations point for hood-mounting bracket on the wall.

2.Secure two mounting screws (not provided) to the wall, leaving an 1/8” space from the wall. (Figure 5)

3.Align the hood-mounting bracket to the mounting screws on the wall and hang hood into place.

Figure 1

Figure 2

Figure 3

Figure 4

RA9230SQB, RA9236SQB specifications

The Kobe Range Hoods RA9230SQB and RA9236SQB models are two highly regarded options for anyone looking to enhance their kitchen ventilation systems. These range hoods provide both functionality and elegance, making them a favored choice amongst homeowners and chefs alike.

Both models feature a sleek and modern design with a square body that seamlessly integrates into any kitchen decor. The RA9230SQB measures 30 inches, while the RA9236SQB measures 36 inches in width, accommodating various kitchen sizes and cooking setups. Their stainless steel construction not only offers durability but also ensures a polished and professional appearance.

One of the standout features of these range hoods is their powerful ventilation capability. The RA9230SQB and RA9236SQB are equipped with a robust dual blower system that efficiently removes smoke, grease, and odors from your kitchen, providing a pleasant cooking environment. They offer multiple fan speeds, allowing users to customize the ventilation level according to their cooking needs. Even on the highest setting, these hoods operate quietly, minimizing noise disruptions while cooking.

The Kobe RA9230SQB and RA9236SQB models incorporate advanced technologies designed to enhance performance and user convenience. The hoods feature energy-efficient LED lights that illuminate the cooking surface without generating excess heat. This not only enhances visibility while cooking but also contributes to energy savings over time.

Both models come with easy-to-clean baffle filters that efficiently capture grease and particulate matter. These filters are dishwasher safe, making maintenance straightforward and hassle-free. Additionally, the range hoods are designed with a seamless installation process, making it easier for homeowners to enjoy upgraded kitchen ventilation.

The stainless steel finish on the Kobe Range Hoods RA9230SQB and RA9236SQB is resistant to fingerprints and smudges, ensuring they stay looking clean and modern. With a combination of style, efficiency, and technology, these range hoods represent a smart investment for anyone serious about maintaining a clean and efficient kitchen space.

Whether you’re preparing a gourmet meal or making a simple dinner, the Kobe RA9230SQB and RA9236SQB provide the performance and aesthetics that can elevate any culinary experience.