Vermont Casting DVR33 manual Installation and Operating Instructions, Locating Your Fireplace

Page 3

Vermont Castings, Majestic Products: DVR33

Installation and Operating Instructions

This gas appliance should be installed by a qualified installer in accordance with local building codes and with current CSA- B149.1 Installation codes for Gas Burning Appliances and Equipment. If the unit is being installed in a mobile home, the installation should comply with the current CAN/CSA Z 240.4 code. For U.S.A. Installations follow local codes and/or the current National Fuel Gas Code. ANSI Z223.1.

FOR SAFE INSTALLATION AND OPERATION PLEASE NOTE THE FOLLOWING:

1.This fireplace gives off high temperatures and should be located out of high traffic areas and away from furniture and draperies.

2.Children and adults should be alerted to the hazards of the high surface temperatures of this fireplace, and should stay away to avoid burns or ignition of clothing.

3.Children should be carefully supervised when in the same room as your fireplace.

4.Under no circumstances should this fireplace be modified. Parts removed for servicing should be replaced prior to operating this fireplace again.

5.Installation and any repairs to this fireplace must be performed by a qualified installer, service agency or gas supplier. A professional service person should be contacted to inspect this fireplace annually. Make it a practice to have all of your gas fireplaces checked annually. More frequent cleaning may be required due to excess lint and dust from carpeting, bedding material, etc.

6.Control compartments, burners and air passages in this fireplace should be kept clean and free of dust and lint. Make sure the gas valve and pilot light are turned off before you attempt to clean this fireplace.

7.The venting system (chimney) of this fireplace should be checked at least once a year and if needed your venting system should be cleaned.

8.Keep the area around your fireplace clear of com- bustible materials, gasoline and other flammable vapor and liquids. This fireplace should not be used as a drying rack for clothing, nor should Christmas stocking or decorations be hung in the area of it.

9.Under no circumstances should any solid fuels (wood, coal, paper or cardboard etc.) be used in this fireplace.

10.The flow of combustion and ventilation air must not be obstructed in any way.

11.When fireplace is installed directly on carpeting, vinyl tile or any combustible material other than wood, this fireplace must be installed on a metal or wood panel extending the full width and depth of the fireplace.

12.This fireplace requires adequate ventilation and combustion air to operate properly.

13.This fireplace must not be connected to a chimney flue serving a separate solid fuel burning fireplace.

14.When the fireplace is not in use it is recommended that the gas valve be left in the OFF position.

PROPOSITION 65 WARNING

Fuels used in gas, wood-burning or oil fired appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm.

California Health & Safety Code Sec. 25249.6

This appliance may be installed in an aftermarket,

permanently located, manufactured home, or

mobile home where not prohibited by local codes.

This appliance is only for use with type of gas indicated on the rating plate. This appliance is not convertible for use with other gases, unless a certified kit is used.

IMPORTANT: PLEASE READ THE FOLLOWING CAREFULLY

Remove any plastic from trim parts before turning the fireplace On.

It is normal for fireplaces fabricated of steel to give off some expansion and/ or contraction noises during the start up or cool down cycle. Similar noises are found with your furnace heat exchanger or car engine.

It is not unusual for a Vermont Castings, Majestic Products gas fireplace to give off some odor the first time it is burned. This is due to the manufacturing process.

Please open all windows to ensure your room is well ventilated.

It is recommended that you burn your fireplace for at least ten (10) hours the first time you use it. If the optional fan kit has been installed, place the fan switch in the “Off” position during this time.

Locating Your Fireplace

E

A

B

Y

 

 

 

 

C

X

 

 

D

 

 

Y

X

B

 

 

F

 

 

 

LU584-R

 

 

Fig. 1 Locating Your Gas Fireplace

 

A) Flat on wall

B) Cross corner

C) Island**

D) Room divider*/ **

E) Flat on wall corner*

F) Chase installation

Y) 6 in. minimum

Notes (Fig. 1):

*When you install your Vermont Castings, Majestic Products fireplace in

(D) Room divider or (E) Flat on wall corner positions, a minimum of (Y), 6 in. (153 mm) clearance must be maintained from the perpendicular wall and the front side edge of the fireplace.

**Island (C) and Room Divider (D) installation is possible if the horizontal portion of the vent system (X) does not exceed 20 ft. (610 cm). See details in Venting Section.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Rear Vented Direct Vent Gas Fireplace Model DVR33 Table of Contents Locating Your Fireplace Installation and Operating InstructionsFireplace Dimensions Appliance DimensionsFraming Dimensions Clearance to Combustibles MantelsHearth Gas Inlet and Manifold Pressures Gas SpecificationsFraming and Finishing Final FinishingGas Line Installation Remote ON/OFF Switch InstallationAlternate Switch Location EB-1 Electrical Box Electronic Gas Control Valve General Venting InformationGeneral Venting Information-Termination Location Canadian Installations1 US Installations2Crimped End Pipes General Information for Connecting Vent PipesCanadian Installations USA InstallationsRear Wall Vent Installation Twist Lock PipesRear Wall Vent Application Vent Opening Noncombustible Wall Vent Opening Combustible WallExample B How To Use the Vent GraphVertical Sidewall Application Example aMax 914 mm Vent Opening Noncombustible Wall Vertical Sidewall Installation7DVSKS Below Grade InstallationVertical Through-the-Roof Applications Snorkel installation, recessed foundationMin ’ 610 mm Vertical Through-the-Roof InstallationDVR33 Bracket Restricter Installation Twist Lock Venting Components Crimped End Venting Components Glass Information Window Frame Assembly RemovalGlass Cleaning Operating InstructionsInstallation of Logs Lava Rock Material Flame and Temperature AdjustmentInspecting the Venting System Flame CharacteristicsTo Turn Off Gas To Heater Lighting and Operating InstructionsLighting and Operating Instructions Lighting InstructionsTurning Off the Gas to the Appliance Window Frame Assembly Should be Removed Before Service Work Troubleshooting Honeywell Millivolt ValveTroubleshooting the Gas Control System SIT 822 Valve with a Honeywell Electronic Igniter Fuel Conversion Instructions Burner and Burner Compartment General MaintenanceCleaning Standing Pilot Control System FK24/FK12 Fan AssemblyDVR33 DVR33 Vermont Castings, Majestic Products DVR33 Vermont Castings, Majestic Products DVR33 Fan Kits Hard Wire Direct Hook-UpRemote Controls Ceramic Refractory PanelsDecorative Bay Windows Bay window Decorative Frame TrimsLimited Lifetime Warranty

DVR33 specifications

The Vermont Casting DVR33 is a prominent name in the hearth solutions market, known for blending exceptional design with advanced heating technology. This distinctive gas fireplace is engineered to offer both efficiency and aesthetic appeal, making it a valuable addition to any home.

One of the primary features of the DVR33 is its realistic flame presentation. Utilizing advanced gas burner technology, it creates a mesmerizing fire that mimics the beauty of traditional wood-burning fireplaces. The flames dance and flicker, providing warmth and comfort while generating an inviting ambiance that enhances any living space.

The DVR33 is designed with energy efficiency in mind. With an efficiency rating of up to 80 percent, this model ensures that minimal heat is lost, making it a cost-effective heating solution. It is also equipped with a sealed combustion system that draws air from outside for combustion, ensuring improved indoor air quality and reducing energy costs.

Safety is another critical aspect of the DVR33. It comes with an electronic ignition system that ensures reliable performance without the need for continuous pilot lights, thus conserving energy. The adjustable flame height and heat output provide users with control over their heating needs, allowing for personalized comfort levels depending on the season or occasion.

Aesthetically, the DVR33 offers a customizable design. Homeowners can select from various fronts, finishes, and decorative options, allowing them to seamlessly integrate the fireplace into their existing decor. The unit also includes a realistic ceramic log set that enhances the lifelike appearance of the flames.

In terms of maintenance, the DVR33 is designed for convenience. It requires minimal upkeep, and the accessible controls simplify operation. Additionally, Vermont Castings offers an impressive warranty, underscoring their commitment to quality and customer satisfaction.

Overall, the Vermont Casting DVR33 stands out as a high-quality gas fireplace that combines technology, efficiency, and design. With its beautiful flame presentation, customizable options, and focus on safety, it’s an ideal choice for anyone looking to enhance their home with the warmth and elegance of a gas fireplace.
Top Page Image Contents