Vermont Casting DVR33 General Maintenance, Cleaning Standing Pilot Control System, Brass Trim

Page 32

Vermont Castings, Majestic Products: DVR33

Regulator Cap

Conversion Screw

Pressure

Regulator

Housing

Honeywell Gas Valve

CO123

 

 

 

Fig. 48 Honeywell gas valve conversion.

 

General Maintenance

Burner and Burner Compartment

It is important to keep the burner and the burner compartment clean. At least once per year the logs and lava rock/ember material should be removed and the burner compartment vacuumed and wiped out. Remove and replace the logs as per the instructions in this manual.

Always handle the logs with care as they are fragile and may also be hot if the fireplace has been in use.

FK24/FK12 Fan Assembly

The fan unit requires periodic cleaning. At least once per month in the operating season, open the lower louvre panels and wipe or vacuum the area around the fan to remove any build up of dust or lint.

Brass Trim

Clean the brass trim pieces using a soft cloth lightly dampened with lemon oil. Do not use water or household cleaners on any brass components.

Contact your local representative to arrange an annual service program.

Cleaning the

Standing Pilot Control System

The burner and control system consists of:

• burner tube

• gas orifice

• pilot assembly

• thermopile

•millivolt gas valve

Most of these components may require only an occasional checkup and cleaning and some may require adjustment. If repair is necessary, it should be performed by a qualified technician.

1.Turn off pilot light at gas valve side.

2.Let fireplace cool if it has been running.

3.Remove window frame assembly. (Refer to Window Frame Assembly Removal section)

4.Remove logs.

5.Vacuum burner compartment especially around orifice primary air openings.

6.Visually inspect pilot. Brush or blow away any dust or lint accumulation.

7.Reinstall logs.

8.Ignite pilot; refer to Lighting Instructions.

9.Reinstall window frame assembly.

To obtain proper operation, it is imperative that the pilot and burner’s flame characteristics are steady, not lifting or floating.

Typically, the top 3/8” or 1/2” of the thermopile should be engulfed in the pilot flame (Fig. 45, page 25).

To adjust pilot burner (to be done by a qualified service technician):

1.Remove pilot adjustment cap.

2.Adjust pilot screw to provide properly sized flame.

3.Replace pilot adjustment cap.

The primary air shutter is set at factory and should be adjusted, if necessary, only by a qualified service technician.

32

10004920

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Rear Vented Direct Vent Gas Fireplace Model DVR33 Table of Contents Installation and Operating Instructions Locating Your FireplaceFraming Dimensions Fireplace DimensionsAppliance Dimensions Hearth Clearance to CombustiblesMantels Gas Specifications Framing and FinishingFinal Finishing Gas Inlet and Manifold PressuresAlternate Switch Location Gas Line InstallationRemote ON/OFF Switch Installation EB-1 Electrical Box General Venting Information Electronic Gas Control ValveCanadian Installations1 US Installations2 General Venting Information-Termination LocationGeneral Information for Connecting Vent Pipes Canadian InstallationsUSA Installations Crimped End PipesRear Wall Vent Application Rear Wall Vent InstallationTwist Lock Pipes Vent Opening Combustible Wall Vent Opening Noncombustible WallHow To Use the Vent Graph Vertical Sidewall ApplicationExample a Example BMax 914 mm Vertical Sidewall Installation Vent Opening Noncombustible WallBelow Grade Installation 7DVSKSSnorkel installation, recessed foundation Vertical Through-the-Roof ApplicationsVertical Through-the-Roof Installation Min ’ 610 mmDVR33 Bracket Restricter Installation Twist Lock Venting Components Crimped End Venting Components Window Frame Assembly Removal Glass CleaningOperating Instructions Glass InformationFlame and Temperature Adjustment Installation of Logs Lava Rock MaterialFlame Characteristics Inspecting the Venting SystemLighting and Operating Instructions To Turn Off Gas To HeaterTurning Off the Gas to the Appliance Lighting and Operating InstructionsLighting Instructions Troubleshooting Honeywell Millivolt Valve Window Frame Assembly Should be Removed Before Service WorkTroubleshooting the Gas Control System SIT 822 Valve with a Honeywell Electronic Igniter Fuel Conversion Instructions General Maintenance Cleaning Standing Pilot Control SystemFK24/FK12 Fan Assembly Burner and Burner CompartmentDVR33 DVR33 Vermont Castings, Majestic Products DVR33 Vermont Castings, Majestic Products DVR33 Hard Wire Direct Hook-Up Fan KitsDecorative Bay Windows Remote ControlsCeramic Refractory Panels Decorative Frame Trims Bay windowLimited Lifetime Warranty

DVR33 specifications

The Vermont Casting DVR33 is a prominent name in the hearth solutions market, known for blending exceptional design with advanced heating technology. This distinctive gas fireplace is engineered to offer both efficiency and aesthetic appeal, making it a valuable addition to any home.

One of the primary features of the DVR33 is its realistic flame presentation. Utilizing advanced gas burner technology, it creates a mesmerizing fire that mimics the beauty of traditional wood-burning fireplaces. The flames dance and flicker, providing warmth and comfort while generating an inviting ambiance that enhances any living space.

The DVR33 is designed with energy efficiency in mind. With an efficiency rating of up to 80 percent, this model ensures that minimal heat is lost, making it a cost-effective heating solution. It is also equipped with a sealed combustion system that draws air from outside for combustion, ensuring improved indoor air quality and reducing energy costs.

Safety is another critical aspect of the DVR33. It comes with an electronic ignition system that ensures reliable performance without the need for continuous pilot lights, thus conserving energy. The adjustable flame height and heat output provide users with control over their heating needs, allowing for personalized comfort levels depending on the season or occasion.

Aesthetically, the DVR33 offers a customizable design. Homeowners can select from various fronts, finishes, and decorative options, allowing them to seamlessly integrate the fireplace into their existing decor. The unit also includes a realistic ceramic log set that enhances the lifelike appearance of the flames.

In terms of maintenance, the DVR33 is designed for convenience. It requires minimal upkeep, and the accessible controls simplify operation. Additionally, Vermont Castings offers an impressive warranty, underscoring their commitment to quality and customer satisfaction.

Overall, the Vermont Casting DVR33 stands out as a high-quality gas fireplace that combines technology, efficiency, and design. With its beautiful flame presentation, customizable options, and focus on safety, it’s an ideal choice for anyone looking to enhance their home with the warmth and elegance of a gas fireplace.
Top Page Image Contents