Garland XE36, XE24 installation instructions Operation, Installing Release Material

Page 10

OPERATION

Installing Release Material:

Slide release material rod through hemmed end of the release material sheet.

around the top and down over the front of the bar as shown.

Place locking clips over release material sheet and press into place over release material bar.

RELEASE

MATERIAL

BAR RELEASE

MATERIAL

LOCKING

CLIP (1)

Hook release material rod on brackets located at the rear of the upper plate

RELEASE

MATERIAL

UPPER PLATEN (side view)

FRONT OF GRILL

 

UPPER PLATEN (side view)

 

RELEASE MATERIAL HOOK

RELEASE

RELEASE MATERIAL SHEET

MATERIAL ROD

 

REAR OF GRILL

Holding the bottom of the release material sheet in place, gently pull the sheet toward the front of the platen.

Thread the front edge of the release material sheet behind the release material bar on the front of the platen, then

Check alignment and tightness of release material against upper platen.

NOTE: Make sure release material fits smoothly over upper platen. Installing release material sheets too tight may cause premature failure of the sheet.

Release sheets are reversible and should be flipped over and reattached on a daily basis. For instructions on cleaning release sheets, see Step 17., at top of Page 15.

A release material sheet must be replaced when:

•Product sticks to release material.

•Carbon build-up causes problems in taste or appearance.

•Tearing occurs in the sheet’s cooking area.

•Release material coating is worn off sheet.

Page 10

Part # 4517125 (09/03)

Page 9 Page 11
Image 10
Page 9 Page 11
Contents For Your Safety Standard Features IntroductionTable of Contents Dimensions and SPECIFICATIONS, Model XE24 220V 3-Phase DeltaDimensions and SPECIFICATIONS, Model XE36 Safety Precautions National Codes Requirements InstallationElectrical Connections Grill Controls Cancel/Raise Platen Button, Green Power ButtonTemperature Button Program ButtonInstalling Release Material OperationTo Cook in Flat Grill Mode To Cook in Two-Sided ModeTo Perform an Additional Cook Cycle To View Settings for a Menu Item Exit Standby ModeTo Display the Current Temperatures To Clean the GrillCleaning During Operation Cleaning and MaintenanceDaily Cleaning Cleaning and Maintenance Platen ZeroingInsert gap tool directly below platen adjusters Programming Programming Modes/Menu SequenceProgramming To Change Grill Set Temperature To Change Upper Platen Set TemperatureMenu Items System Info To View Recovery Time Upper PlatenTo View Recovery Time Grill To Change a Product NameTo View the Flash Number To View the Garland Part NumberTo View the Software Number To View the Download NumberTo Change the Alarm Volume System SetupTo Change Gap Setting Display Units To Change Probe Calibration UpperTo Change Platen Set To Change Probe Calibration GrillTo Change Instant-On Time To Turn Extended Time On/Off To Change the Start DelayTo Change Control Type To Change the Grill FunctionTo Turn Clean Mode On/Off Service ModeTo Change the Alarm Mode To Change SCK AddressTo Change Gap Setting To Perform Limit Switch TestGap Button Calibration Bi-Weekly CalibrationCalibration Probe LocationsTroubleshooting Error MessagesWiring Diagrams Wiring CBA4517125 09/03

XE36, XE24 specifications

The Garland XE24 and XE36 are two standout models in the realm of commercial cooking equipment, designed to enhance efficiency and performance in professional kitchens. These electric griddles are engineered with precision to meet the demanding needs of chefs and foodservice operations.

The XE24, featuring a compact 24-inch cooking surface, is ideal for smaller kitchens that require versatility without sacrificing quality. Its heavy-duty stainless steel construction not only provides durability but also ensures easy maintenance and hygiene. With a 1-inch thick polished steel cooking surface, the XE24 offers excellent heat retention and even heat distribution, allowing for consistent cooking results.

In contrast, the XE36 boasts a larger 36-inch cooking area, making it perfect for high-volume establishments. The additional space allows for cooking multiple items simultaneously, which is crucial in busy commercial settings. Like its smaller counterpart, the XE36 is constructed from robust stainless steel, ensuring longevity and resistance to wear and tear.

Both models feature advanced temperature control systems with durable thermostats, facilitating precise cooking temperatures. This feature is especially important for chefs who require exact heat settings to perfect their dishes. The griddles also come equipped with a built-in grease drawer, simplifying the cleanup process and maintaining a safe cooking environment.

Furthermore, Garland has integrated multiple heating elements beneath the cooking surface, allowing for rapid heat recovery. This technology ensures that cooking times are minimized, which is essential during peak service hours. Additionally, the griddles are designed with an ergonomic front panel and intuitive controls, making operation straightforward and efficient.

Safety features are paramount in both the XE24 and XE36 models. They are equipped with a high-temperature cut-off switch, preventing overheating and reducing the risk of fire. The griddles also have a sturdy base designed for stability, ensuring they remain secure during heavy use.

In summary, the Garland XE24 and XE36 electric griddles are exceptional choices for commercial kitchens looking for reliable performance, durability, and ease of use. With their innovative features and construction, these models are tailored to meet the rigorous demands of modern foodservice operations, making them indispensable tools for chefs worldwide.
Top Page Image Contents