Garland XE36, XE24 installation instructions Cleaning and Maintenance, Platen Zeroing

Page 14

CLEANING AND MAINTENANCE continued

7.Remove the release sheet locking clips and bars.

8.Scrape only the lower grill surface with a grill scraper, and squeegee any residue into the grease troughs with a grill squeegee.

Caution: Do not scrape or otherwise scratch the upper platens. The use of metal scrapers, abrasive pads, or wire brushes will permanently damage the surface of the upper platens.

9.Open one packet of high-temperature grill cleaner, (several cleaners may be available on the market), and empty the contents into a suitable container. (One packet will clean one grill.)

10.Firmly attach a no-scratch pad to a pad holder.

11.Dip the no-scratch pad into the grill cleaner, and spread a light coating of grill cleaner over the entire platen surface, back, front, and side edges of both upper platens. DO NOT SCRUB.

12.After applying the grill cleaner, lightly scrub the platen surfaces, BACK, FRONT AND SIDE EDGES with the no-scratch pad until all the soil has been liquefied by the grill cleaner. For stubborn soils, apply additional grill cleaner and lightly scrub. DO NOT RINSE THE PLATENS AT THIS TIME.

13.Starting at the back of the lower grill, spread a light coating of grill cleaner over the entire surface. DO NOT SCRUB.

14.After applying the grill cleaner, lightly scrub the grill surface with the No-Scratch Pad until all the soil has been liquefied.

15.Rinse the upper platens with a dripping wet cloth.

16.Carefully pour small quantities of lukewarm water onto the grill while brushing the surface, backsplash, and bullnose with a pot brush or equivalent high-temperature brush. Continue until the water no longer boils away and the grill remains wet. Squeegee dry.

Caution: Ice, cold water, or large quantities of water must never be applied to the grill plate or upper platen. Severe damage to the grill will occur!

17.Clean the release sheets as follows:

A)Place the sheets on the lower grill. Scrub both sides of the sheets with the same no-scratch pad used on the grill.

B)Rinse both sides of the sheets with a clean, wet cloth.

18.Rinse the lower grill by flooding the surface twice with lukewarm water. Squeegee after each rinse.

19.Wipe the lower grill surface, backsplash, bullnose, and hood with a clean, damp cloth.

20.When cleaning is completed, you may turn the “MASTER POWER” (rocker) switch off.

AFTER CLEANING, apply a thin coat of fresh shortening to the lower grill surface only. Wipe down the surrounding areas. Empty, wash, rinse, and replace the grease troughs.

Platen Zeroing:

Turn Master power switch “ON”, wait for controllers to display “OFF”.

1.Press and holdfor three, (3) seconds. “ENTER CODE” will be displayed.

2.Using the Gap Setting buttons, enter the code, (1251). “ENTER CODE **** ” will be displayed.

3.Press to enter the Programming Mode.

“PROGRAMMING MODE MENU ITEMS” will be displayed.

4.Press two, (2) times in succession to display

“PROGRAMMING MODE SYSTEM SETUP.”

5.Presssix, (6) times. “PLATEN SET +/- XX” will be displayed. (XX=numbers that will vary from grill to grill.)

Page 14

Part # 4517125 (09/03)

Page 13 Page 15
Image 14
Page 13 Page 15
Contents For Your Safety Standard Features IntroductionTable of Contents Dimensions and SPECIFICATIONS, Model XE24 220V 3-Phase DeltaDimensions and SPECIFICATIONS, Model XE36 Safety Precautions Electrical Connections InstallationNational Codes Requirements Grill Controls Cancel/Raise Platen Button, Green Power ButtonTemperature Button Program ButtonInstalling Release Material OperationTo Perform an Additional Cook Cycle To Cook in Two-Sided ModeTo Cook in Flat Grill Mode To View Settings for a Menu Item Exit Standby ModeTo Display the Current Temperatures To Clean the GrillDaily Cleaning Cleaning and MaintenanceCleaning During Operation Cleaning and Maintenance Platen ZeroingInsert gap tool directly below platen adjusters Programming Programming Modes/Menu SequenceProgramming Menu Items To Change Upper Platen Set TemperatureTo Change Grill Set Temperature System Info To View Recovery Time Upper PlatenTo View Recovery Time Grill To Change a Product NameTo View the Flash Number To View the Garland Part NumberTo View the Software Number To View the Download NumberTo Change the Alarm Volume System SetupTo Change Gap Setting Display Units To Change Probe Calibration UpperTo Change Instant-On Time To Change Probe Calibration GrillTo Change Platen Set To Turn Extended Time On/Off To Change the Start DelayTo Change Control Type To Change the Grill FunctionTo Turn Clean Mode On/Off Service ModeTo Change the Alarm Mode To Change SCK AddressGap Button To Perform Limit Switch TestTo Change Gap Setting Calibration Bi-Weekly CalibrationCalibration Probe LocationsTroubleshooting Error MessagesWiring Diagrams Wiring CBA4517125 09/03

XE36, XE24 specifications

The Garland XE24 and XE36 are two standout models in the realm of commercial cooking equipment, designed to enhance efficiency and performance in professional kitchens. These electric griddles are engineered with precision to meet the demanding needs of chefs and foodservice operations.

The XE24, featuring a compact 24-inch cooking surface, is ideal for smaller kitchens that require versatility without sacrificing quality. Its heavy-duty stainless steel construction not only provides durability but also ensures easy maintenance and hygiene. With a 1-inch thick polished steel cooking surface, the XE24 offers excellent heat retention and even heat distribution, allowing for consistent cooking results.

In contrast, the XE36 boasts a larger 36-inch cooking area, making it perfect for high-volume establishments. The additional space allows for cooking multiple items simultaneously, which is crucial in busy commercial settings. Like its smaller counterpart, the XE36 is constructed from robust stainless steel, ensuring longevity and resistance to wear and tear.

Both models feature advanced temperature control systems with durable thermostats, facilitating precise cooking temperatures. This feature is especially important for chefs who require exact heat settings to perfect their dishes. The griddles also come equipped with a built-in grease drawer, simplifying the cleanup process and maintaining a safe cooking environment.

Furthermore, Garland has integrated multiple heating elements beneath the cooking surface, allowing for rapid heat recovery. This technology ensures that cooking times are minimized, which is essential during peak service hours. Additionally, the griddles are designed with an ergonomic front panel and intuitive controls, making operation straightforward and efficient.

Safety features are paramount in both the XE24 and XE36 models. They are equipped with a high-temperature cut-off switch, preventing overheating and reducing the risk of fire. The griddles also have a sturdy base designed for stability, ensuring they remain secure during heavy use.

In summary, the Garland XE24 and XE36 electric griddles are exceptional choices for commercial kitchens looking for reliable performance, durability, and ease of use. With their innovative features and construction, these models are tailored to meet the rigorous demands of modern foodservice operations, making them indispensable tools for chefs worldwide.
Top Page Image Contents