Garland XE24, XE36 Installation, National Codes Requirements, Electrical Connections

Page 7

INSTALLATION

IMPORTANT: Rating plates for this appliance are

located in two places: 1) inside back panel on left side, 2) under front control panel on center.

This equipment must be installed by a competent factory trained, certified, licensed and / or authorized service or installation person.

WARNING: This appliance must be properly grounded.

Prior to installation, the four casters, supplied loose with the grill, must be securely located on the underside of the base. The casters fitted with a brake must be located at the front of the grill.

This appliance should be connected to a potential equalization system. A labeled equipotential bonding point is fitted to the rear of the grill.

It is recommended that this grill be connected to a residual current,, (earth leakage),, device with a tripping current not exceeding 30mA. The leakage current of this grill will not exceed 5mA.

CAUTION: Prior to installation, check the electrical supply to ensure input voltage and phase match the equipment voltage rating and phase. See data plate located rear left side of grill and lower front panel.

Grill is to be located directly under ventilation system.

Once installed in the grill station underneath the ventilation system, the platens, in their highest position, must not interfere with the lower lip of the ventilation system hood. The raised position of each platen is adjusted by raising or lowering the upper of the two microswitches, (limit switches), in the rear of the grill. The lower microswitch position must not be adjusted.

Grill plate must be level front to back, side to side and diagonally. This leveling must be done with the unit under the hood and in it’s normal operational position to prevent warping of the grill plate.

NOTE: Fuses are installed to prevent damage in the event of failure of the upper microswitch.

National Codes Requirements:

In Canada, electrical connection must comply with applicable sections of the Canadian Electrical Code, C22.1 - 1990, latest edition, “Safety Standard for Installation, Part 1” and C22.2- No. O-M 1982 latest edition , “General Requirements, Part 2”.

Electrical Connections:

All electrically operated appliances must be electrically grounded in accordance with local codes; or in the absence of local codes, with the latest edition of National Wiring Regulations. A wiring diagram is located on the rear panel of the grill. See rating plate in rear of grill, or lower front panel for proper voltages.

Part # 4517125 (09/03)

Page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents For Your Safety Introduction Standard FeaturesTable of Contents 220V 3-Phase Delta Dimensions and SPECIFICATIONS, Model XE24Dimensions and SPECIFICATIONS, Model XE36 Safety Precautions National Codes Requirements InstallationElectrical Connections Grill Controls Program Button Power ButtonTemperature Button Cancel/Raise Platen Button, GreenOperation Installing Release MaterialTo Cook in Flat Grill Mode To Cook in Two-Sided ModeTo Perform an Additional Cook Cycle To Clean the Grill Exit Standby ModeTo Display the Current Temperatures To View Settings for a Menu ItemCleaning During Operation Cleaning and MaintenanceDaily Cleaning Platen Zeroing Cleaning and MaintenanceInsert gap tool directly below platen adjusters Programming Modes/Menu Sequence ProgrammingProgramming To Change Grill Set Temperature To Change Upper Platen Set TemperatureMenu Items To Change a Product Name To View Recovery Time Upper PlatenTo View Recovery Time Grill System InfoTo View the Download Number To View the Garland Part NumberTo View the Software Number To View the Flash NumberTo Change Probe Calibration Upper System SetupTo Change Gap Setting Display Units To Change the Alarm VolumeTo Change Platen Set To Change Probe Calibration GrillTo Change Instant-On Time To Change the Grill Function To Change the Start DelayTo Change Control Type To Turn Extended Time On/OffTo Change SCK Address Service ModeTo Change the Alarm Mode To Turn Clean Mode On/OffTo Change Gap Setting To Perform Limit Switch TestGap Button Bi-Weekly Calibration CalibrationProbe Locations CalibrationError Messages TroubleshootingWiring Diagrams CBA Wiring4517125 09/03

XE36, XE24 specifications

The Garland XE24 and XE36 are two standout models in the realm of commercial cooking equipment, designed to enhance efficiency and performance in professional kitchens. These electric griddles are engineered with precision to meet the demanding needs of chefs and foodservice operations.

The XE24, featuring a compact 24-inch cooking surface, is ideal for smaller kitchens that require versatility without sacrificing quality. Its heavy-duty stainless steel construction not only provides durability but also ensures easy maintenance and hygiene. With a 1-inch thick polished steel cooking surface, the XE24 offers excellent heat retention and even heat distribution, allowing for consistent cooking results.

In contrast, the XE36 boasts a larger 36-inch cooking area, making it perfect for high-volume establishments. The additional space allows for cooking multiple items simultaneously, which is crucial in busy commercial settings. Like its smaller counterpart, the XE36 is constructed from robust stainless steel, ensuring longevity and resistance to wear and tear.

Both models feature advanced temperature control systems with durable thermostats, facilitating precise cooking temperatures. This feature is especially important for chefs who require exact heat settings to perfect their dishes. The griddles also come equipped with a built-in grease drawer, simplifying the cleanup process and maintaining a safe cooking environment.

Furthermore, Garland has integrated multiple heating elements beneath the cooking surface, allowing for rapid heat recovery. This technology ensures that cooking times are minimized, which is essential during peak service hours. Additionally, the griddles are designed with an ergonomic front panel and intuitive controls, making operation straightforward and efficient.

Safety features are paramount in both the XE24 and XE36 models. They are equipped with a high-temperature cut-off switch, preventing overheating and reducing the risk of fire. The griddles also have a sturdy base designed for stability, ensuring they remain secure during heavy use.

In summary, the Garland XE24 and XE36 electric griddles are exceptional choices for commercial kitchens looking for reliable performance, durability, and ease of use. With their innovative features and construction, these models are tailored to meet the rigorous demands of modern foodservice operations, making them indispensable tools for chefs worldwide.
Top Page Image Contents