Zanussi ZDI 112 manual Only before filling with

Page 10

Unscrew the cap.

Remove any trace of salt. Replace the cap tightly turning it clockwise until it stops with a click.

Only before filling with

Using the funnel provided,

salt for the first time, fill

pour in the salt until the

the salt container with wa-

container is filled with salt.

ter.

 

IMPORTANT!

Immediately start a complete programme.

IMPORTANT!

Water will overflow from the container as salt is added.

IMPORTANT!

Top up the special salt when the light on the control panel illuminates.

10

Image 10
Contents Dishwasher ZDI Contents Child safety Safety informationGeneral safety Correct useInstallation Control panelStarting the washing programme Washing programmes When using tablets that integrate rinse aid and detergent First useWater hardness Mmol/l Set the water softenerUse of salt Setting the water softener electronically see table Setting the water softener manually see tableFilling with dishwasher salt Only before filling with Adjusting the dosage of rinse aid Filling with rinse aidLoading cutlery and dishes Are of limited suitability Upper basket Adjusting the height of the upper basketMaximum height of the dishes Lower basketUnloading the dishwasher Use of detergentDetergent tablets Care and cleaning Cleaning the filtersEnvironmental concerns Possible cause and solution Fault code and malfunctionSomething not working Fault code and malfunction Technical data Wash results are not satisfactoryConsumption values Full load 12 standard place settingsHints for test institutes Water inlet hose with safety valve InstallationWater connection Drain hose Must be removed . FailFitting under a counter Electrical connectionLevelling Page Page Page 156991060-00-19102007 Subject to change without notice