Zanussi ZDI 112 manual Starting the washing programme

Page 5

Programme selector dial and On/Off switch

Start/cancel button

Delay start button

Programme selector indicator light

when in this position, the machine is switched off (corresponding light off),

when the marker on the dial corresponds with a programme, the machine is switched on and a pro- gramme is selected (programme selector indicator light on)

Starting the washing programme:

1.Select a washing programme.

2.Press the Start/Cancel button (corresponding light on).

IMPORTANT!

Once the programme has started, if you want to change the selection made you must cancel the wash- ing programme in progress.

Cancel the washing programme in progress:

1.Press and hold the Start/Cancel button until the corresponding light turns off.

2.Release the Start/Cancel button.

3.Turn the programme selector dial to the Off po- sition or select a new washing programme (check that there is detergent in the detergent dispenser.

This option allows the start of the programme to be delayed by 3 hours.

Once the washing programme has been set, press the delay start button. The corresponding indicator light illuminates.

Press the Start/Cancel button, the countdown of the delay start begins automatically.

Once the countdown has elapsed the washing pro- gramme will start automatically. The delay start indi- cator light turns off.

Cancel the delay start in progress: press and hold the Start/Cancel button until the Start/Cancel and de- lay start indicator lights turn off.

To start the washing programme press the Start/Can- cel button.

Illuminates when the washing programme is selected

5

Image 5
Contents Dishwasher ZDI Contents General safety Safety informationChild safety Correct useControl panel InstallationStarting the washing programme Washing programmes First use When using tablets that integrate rinse aid and detergentUse of salt Set the water softenerWater hardness Mmol/l Filling with dishwasher salt Setting the water softener manually see tableSetting the water softener electronically see table Only before filling with Filling with rinse aid Adjusting the dosage of rinse aidLoading cutlery and dishes Are of limited suitability Maximum height of the dishes Adjusting the height of the upper basketUpper basket Lower basketDetergent tablets Use of detergentUnloading the dishwasher Cleaning the filters Care and cleaningEnvironmental concerns Something not working Fault code and malfunctionPossible cause and solution Fault code and malfunction Wash results are not satisfactory Technical dataHints for test institutes Full load 12 standard place settingsConsumption values Water connection InstallationWater inlet hose with safety valve Must be removed . Fail Drain hoseLevelling Electrical connectionFitting under a counter Page Page Page 156991060-00-19102007 Subject to change without notice