Zanussi ZDI 112 manual Use of detergent, Unloading the dishwasher, Detergent tablets

Page 15

Use of detergent

IMPORTANT!

Only use detergents suitable for dishwashers.

Observe the manufacturer’s dosing and stor- age recommendations.

Open the lid.	Fill in the detergent in	Observe the dosing lev-
	compartment A.	els.

For programmes with pre-	When using detergent	Close the lid.
wash add an additional	tablets: place detergent
detergent dose in com-	tablets in compartment A.
partmentB.

Detergent tablets

Detergent tablets from different manufacturers dissolve at different rates. For this reason, some detergent tablets do not attain their full

cleaning power during short washing pro- grammes. Therefore, please use long washing programmes when using detergent tablets, to ensure the complete removal of detergent residuals.

Unloading the dishwasher

•Hot dishes are sensitive to knocks.

The dishes should therefore be allowed to cool down before removing from the appli- ance.

•Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

15

Image 15

Contents Dishwasher ZDI Contents Correct use Safety informationGeneral safety Child safetyControl panel InstallationStarting the washing programme Washing programmes First use When using tablets that integrate rinse aid and detergentSet the water softener Water hardness Mmol/lUse of salt Setting the water softener manually see table Setting the water softener electronically see tableFilling with dishwasher salt Only before filling with Filling with rinse aid Adjusting the dosage of rinse aidLoading cutlery and dishes Are of limited suitability Lower basket Adjusting the height of the upper basketMaximum height of the dishes Upper basketUse of detergent Unloading the dishwasherDetergent tablets Cleaning the filters Care and cleaningEnvironmental concerns Fault code and malfunction Possible cause and solutionSomething not working Fault code and malfunction Wash results are not satisfactory Technical dataFull load 12 standard place settings Consumption valuesHints for test institutes Installation Water inlet hose with safety valveWater connection Must be removed . Fail Drain hoseElectrical connection Fitting under a counterLevelling Page Page Page 156991060-00-19102007 Subject to change without notice