Zanussi ZDI 112 manual Are of limited suitability

Page 13

For washing in the dishwasher the following cutlery and dishes

are not suitable:

Cutlery with wooden, horn, china or mother-of- pearls handles.

Plastic items that are not heat resistant.

Older cutlery with glued parts that are not tempera- ture resistant.

Bonded cutlery items or dishes.

Pewter or copper items.

Lead crystal glass.

Steel items prone to rusting.

Wooden platters.

Items made from synthetics fibres.

are of limited suitability:

Only wash stoneware in the dishwasher if it is specially marked as being dishwasher-safe by the manufacturer.

Glazed patterns may fade if machine washed frequently.

Silver and aluminium parts have a tendency to dis- colour during washing: Residues, e.g. egg white, egg yolk and mustard often cause discolouring and staining on silver. Therefore always clean left-overs from silver immediately, if it is not to be washed straight after use.

Load cutlery. For best re- sults we recommend you to use the cutlery grid pro- vided (if the size and di- mensions of the cutlery allow it)

Place knives and other items of cutlery with sharp points or edges with their handles facing upwards. Risk of injury!

Load the lower basket. Ar- range serving dishes and large lids around the edge of the basket.

13

Image 13
Contents Dishwasher ZDI Contents General safety Safety informationChild safety Correct useControl panel InstallationStarting the washing programme Washing programmes First use When using tablets that integrate rinse aid and detergentWater hardness Mmol/l Set the water softenerUse of salt Setting the water softener electronically see table Setting the water softener manually see tableFilling with dishwasher salt Only before filling with Filling with rinse aid Adjusting the dosage of rinse aidLoading cutlery and dishes Are of limited suitability Maximum height of the dishes Adjusting the height of the upper basketUpper basket Lower basketUnloading the dishwasher Use of detergentDetergent tablets Cleaning the filters Care and cleaningEnvironmental concerns Possible cause and solution Fault code and malfunctionSomething not working Fault code and malfunction Wash results are not satisfactory Technical dataConsumption values Full load 12 standard place settingsHints for test institutes Water inlet hose with safety valve InstallationWater connection Must be removed . Fail Drain hoseFitting under a counter Electrical connectionLevelling Page Page Page 156991060-00-19102007 Subject to change without notice