Zanussi ZDI 112 manual Loading cutlery and dishes

Page 12

Open the lid.

Set the dosage level. (The

Close the lid and press un-

 

dose is factory set in po-

til it locks.

 

sition 4).

 

Loading cutlery and dishes

Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.

Before loading the dishes, you should:

Remove all left over food and debris.

Soften remnants of burnt food in pans

When loading the dishes and cutlery, please note:

Dishes and cutlery must not impede the rotation of the spray arms.

Load hollow items such as cups, glasses, pans, etc. with the opening downwards so that water cannot collect in the container or a deep base.

Dishes and items of cutlery must not lie inside one another, or cover each other.

To avoid damage to glasses, they must not touch.

Lay small objects in the cutlery basket.

Plastic items and pans with non stick coat- ings have a tendency to retain water drops; these items will not dry as well as porcelain and steel items.

Light items (plastic bowls etc.) must be loa- ded in the upper basket and arranged so they do not move.

12

Image 12
Contents Dishwasher ZDI Contents Safety information General safetyChild safety Correct useInstallation Control panelStarting the washing programme Washing programmes When using tablets that integrate rinse aid and detergent First useSet the water softener Water hardness Mmol/lUse of salt Setting the water softener manually see table Setting the water softener electronically see tableFilling with dishwasher salt Only before filling with Adjusting the dosage of rinse aid Filling with rinse aidLoading cutlery and dishes Are of limited suitability Adjusting the height of the upper basket Maximum height of the dishesUpper basket Lower basketUse of detergent Unloading the dishwasherDetergent tablets Care and cleaning Cleaning the filtersEnvironmental concerns Fault code and malfunction Possible cause and solutionSomething not working Fault code and malfunction Technical data Wash results are not satisfactoryFull load 12 standard place settings Consumption valuesHints for test institutes Installation Water inlet hose with safety valveWater connection Drain hose Must be removed . FailElectrical connection Fitting under a counterLevelling Page Page Page 156991060-00-19102007 Subject to change without notice